|
CODES AND STANDARDS COOLER/FREEZER ALARMS CLIENT-
<br /> NSF STANDARDS: COMPLY WITH APPLICABLE NATIONAL SANITATION COOLER FREEZER ALARMS AS MANUFACTURED BY:
<br /> FOUNDATION (NSF) STANDARDS AND RECOMMENDED CRITERIA. PROVIDE COOLER/
<br /> FREEZER
<br /> PRINCIPAL ITEM OF FOOD SERVICE EQUIPMENT WITH A NSF NATIONAL CONTROLS CORPORATION
<br /> "SEAL OF APPROVAL"
<br /> 1725 WESTERN DRIVEk., V
<br /> ...
<br /> UL LABEL: WHERE AVAILABLE, PROVIDE UL LABELS ON PRIME WEST CHICAGO, IL. 60185
<br /> CU-1 CU-2 O
<br /> ELECTRICAL COMPONENTS F FOOD SERVICE (EQUIPMENT. PROVIDE
<br /> „ (800) 323-2593
<br /> UL RECOGNIZED MARKING„ ON OTHER ITEMS WITH ELECTRICAL r :y.:•..
<br /> I I COMPONENTS SIGNIFYING LISTING BY UL, WHERE AVAILABLE.
<br /> PROVIDE THE FOLLOWING:
<br /> ROOF I ROOF HEALTH CODE: INSTALL FOOD SERVICE EQUIPMENT IN ACCORDANCE (1) DUAL KIT #TNC-TM100-KT2A
<br /> WITH LOCAL HEALTH DEPARTMENT APPLICABLE. REGULATIONS. KIT INCLUDES:
<br /> - - - -`- - - - - - - - - - - - " - 121 THERMOMETER UNITS
<br /> - ^ - - - - - - - - 1. SHOP DRAWINGS UPON APPROVAL OF BID„ SUBMIT 3 SETS OF • 2 TEMPERATURE PROBES WITH 6'--0" WIRE
<br /> L COMPLETE DETAILS, MECHANICAL AND ELECTRICAL REQUIREMENTS, • 1 TRANSFORMER
<br /> AND INSTALLATION INSTRUCTIONS OF EACH ITEM. INCLUDE INFORMATION • 1 STAINLESS STEEL TWIN ENCLOSURE
<br /> S L S ON ROUGHING IN DIMENSIONS, SERVICE CONNECTION REQUIREMENTS,
<br /> TRAP AT RISER (TYP.) OPENINGS, DISPLAY AND LATCH DOOR MANUFACTURER'S INFORMATION, ADDITIONAL PROBE WIRE #X02-22GNO-820
<br /> S - - S - - S - COMPLETE FLOOR PLANS AND EQUIPMENT SPECIFICATIONS.
<br /> INSTALLATION:
<br /> 2. EQUIPMENT.
<br /> NLD MEASUREMENTS TO ASSURE ,ACCURATE FIT OF FABRICATED • INSTALL THERMOMETER UNITS IN CASHIER AREA.
<br /> I
<br /> 3. INCLUDE WARRANTY INFORMATION ON ALL EQUIPMENT. • INSTALL TEMPERATURE PROBE IN EACH RESPECTIVE COOLER/FREEZER
<br /> COMPARTMENT. SPLICE THE 6'-0" PROBE WIRE WITH ADDITIONAL
<br /> L - PROBE WIRE AS REQUIRED TO RETURN TO CASHIER AREA. ARCO
<br /> • COMPLETELY SEAL ANY AND ALL INTRUSIONS TO COOLER/FREEZER
<br /> r I I LEGENDS - COMPARTMENTS. BP WEST COAST PRODUCTS,LLC
<br /> IC_ ---S--- SUCTION .� IC. • LABEL ALL THERMOMETER UNITS PER RESPECTIVE COOLER/FREEZER
<br /> _ TRAP AT RISER TYP. COMPARTMENTS.
<br /> LIQUID ( )
<br /> CONDENSATE DRAIN • SET ALARM TEMPERATURE AS FOLLOWS: ��++�� V4A' r
<br /> •WALK-IN COOLER: +35' F. �7' V
<br /> C --C- -- C- ---- C _j NOTE: L -C - •WALK-IN FREEZER: D' F.
<br /> �- ALL SUCTION LINES TO BE INSULATED • LOCATE TEMP. PROBES A MIN 2'-0" FROM WALL AND 5'-0" FROM DOOR.
<br /> � m Z
<br /> 1 n U
<br /> 2
<br /> TRAP LEAVING REFRIGERATED ROOM TRAP LEAVING REFRIGERATED ROOM WALK-IN COOLER NOTES I.. l��
<br /> 1.0 GENERAL NOTES: 5.0 REFRIGERATION: CT�hC EN �
<br /> 1.1 WALK-IN COOLER SHALL BE PREFABRICATED METAL CLAD PANELS 5.1 ALL EQUIPMENT MUST CONFORM TO CONDENSING UNITS AND UNIT
<br /> BY CUSTOM COOLERS INC. OR EQUAL. DESIGNED IN MODULAR COOLERS SCHEDULE AS OUTLINED ON THIS SHEET. EQUIPMENT MUST
<br /> CONCEPT TO FACILITATE ACCURATE JOB SITE ASSEMBLY. HAVE UL LISTING FOR THE APPLICATION AS SPECIFIED. 18215 72ND AVENUE SOUTH
<br /> 2.0 PANEL CONSTRUCTION: 5.2 CONDENSING UNIT AS SPECIFIED SHALL HAVE THE FOLLOWING: KENT, WA 98032
<br /> 01 EVAPORATION PIPING SYSTEM (425)251-6222
<br /> 2.1 ALL PANELS SHALL BE FOAMED-IN-PLACE CLASS 1, POLYURETHANE 1. HIGH EFFICIENCY ALUMINUM FIN. COPPER TUBE CONDENSER. (425)251-8782 FAX
<br /> SCALE: N/A CONSTRUCTION WITH 3 1/2" COMPOSITE: PANEL. THE "R" VALUE TO 2. COMPRESSOR CONTRACTOR.
<br /> BE 30 WITH A DENSITY OF 2.2 POUNDS PER CUBIC FOOT. 3. HIGH AND LOW PRESSURE CONTROLS CML ENGINEERING, LAND PLANNING,
<br /> EVAPORATOR COILS 2.2 THE PERIMETER OF ALL PANELS SHALL BE BUTT JOINT 4. WEATHER RESISTANT HOUSING WITH WEATHER-PROOF ELECTRICAL SURVEYING, ENVIRONMENTAL SERVICES
<br /> CONTROL BOX.
<br /> 32'-6" O.D. COOLER DEFROST FAN 5. ACCESS GUARD.
<br /> FANS REFG. REFG. POWER BOX 2.3 PANELS TO BE JOINED AM ACTIO BY ENGAGING A CAM-ACTION 6. LOW AMBIENT CONTROL VALVE (CVP II) FPR FLOATING HEAD. NO. DATE REVISION DESCRIPTION
<br /> BOX LOAD HEATCRAFT TYPE CHG. B.T.U. S SUPPLY TEMP. HEATER MOTOR LOCKING DEVICE. THE GAM ACTION DEVICE WILL DRAW THE SECTIONS 7. CRANKCASE HEATER.
<br /> 18'- 1" 5'- 3" 8'-43" REQUIREMENTS Qom' MODEL # QTY- CFM R LBS. 1 HR. .F TOGETHER TO FORM A TIGHT SEAL. n 03/10/17 PERMIT SUBMITTAL
<br /> � EACH EACH MCA MCA 8. LIQUID LINE FILTER DRIER, SIGHT GLASS AND SERVICE VALVE.
<br /> lot L# 2.4 STANDARD PANEL FINISH SHALL BE 26 GAUGE STUCCO EMBOSSED 9. ELECTRIC DEFROST TIMER.
<br /> CU-1 COOLER 40,034 BTU/H 4 LCA6110AB 2 1,300 404A -- 9,400 208/230/1/60 +34 7.8 2.0 GALVANIZED STEEL SKIN EXTERIOR WITH WHITE INTERIOR. 10. EXPANSION VALVES.
<br /> z
<br /> REACH-IN 2.5 PROVIDE 7-1/2" DOOR SILL HEIGHTS FOR GLASS DISPLAY DOORS. 11. THERMOSTAT AND SOLENOID.
<br /> 9��ry CU-2 FREEZER 2,132 BTU/H 1 LCE694B6 1 335 404A -- 2,800 208/230/1/60 -15 5.7 1.2 �
<br /> 2.6 INSULATION IS CLASS 1, POLYURETHANE FOAM WITH A FLAME SPREAD 5.3 EVAPORATOR COILS SPECIFIED IN EVAPORATOR COIL SCHEDULE.
<br /> LESS THAN 25 AND A SMOKE DEVELOPMENT OF LESS THAN 450. 4
<br /> CONDENSING UNITS 2.7 CERTIFICATIONS: UL AND NSF APPROVED 5.4 EXPANSION VALVE SHALL BE SIZED BY UNIT COOLER MANUFACTURER
<br /> s FOR PROPER REFRIGERATION. AS HEAD PRESSURE IS ALLOWED TO O
<br /> _ REFG. REFG. CAPACITY MIN. MAX. 2.8 MEASUREMENTS AND CONFIGURATIONS REFER TO THIS SHEET. DROP DURING LOW AMBIENT CONDITIONS, EXPANSION VALVE NEEDS
<br /> BOX LOAD HEATCRAFT SUCTION B.T.U.'S POWER DEFROST TO BE OVERSIZED TO ALLOW FLOW AT LOWER PRESSURE DIFFERENTIAL
<br /> I REQUIREMENTS QTY- TYPE CHG. 1 HR. CCT. FUSE RATIO. Q
<br /> �- MODEL � TEMP. R LBS. SUPPLY TIMER AMP. SIZE 3.0 COOLER WALK-IN DOOR
<br /> EACH MANUFACTURED BY CUSTOM COOLERS, INC. OR EQUAL.
<br /> ci 24,000 5.5 THERMOSTATS SHALL BE FURNISHED LOOSE FOR EACH SYSTEM AND Q
<br /> i CU-1 COOLER 40,034 BTU/H 1 MOH03OX63C +25' 404A 20.0 ®110' AMB. 208/230/3/60 ELECTRIC 38.0 40 3.1 36" x 82" CUSTOM *ANTHONY 103NT (HEAVY DUTY) ALL GLASS SHALL BE WHITE RODGERS MODEL #1609-101 OR EQUAL, TAMPER--PROOF 8
<br /> o� PASS-THRU DOOR, SLIMLINE BLACK HANJDLE, PRO LEDs, N4 WITH PROPER TEMPERATURE RANGE, AS REQUIRED ON THIS DRAWING. Q
<br /> CU-2 REACH-IN 2 132 BT 1 MQHd31 Lfi3C -20' 404A 5.5 3'281 208/230/3/60 ELECTRIC 15.0 25 THRESHOLD, CYLINDER DOOR LOCK, ALL. BLACK FINISH DOOR & FRAME, OPTIONAL MANUFACTURERS: JOHNSON OR RANCO OR EQUAL.
<br /> FREEZER 0110' RMB. STAINLESS STEEL INTERIOR EXTERIOR 1 m" KICKPLATES.
<br /> sr- / 5.6 SOLENOIDS SHALL BE FURNISHED LOOSE FOR EACH SYSTEM AS
<br /> j �3 x 3.2 LOCATION AND SWING AS SHOWN ON THIS SHEET. ECOMMENDED BY CONDENSING UNIT MANUFACTURER. Q
<br /> r 3.3 FREEZER WALK-IN DOOR 5.7)ONDENSATE PIPING SHALL BE COPPER OR PVC AND TRAPPED AFTER SEAL
<br /> MANUFACTURED BY CUSTOM COOLERS, (INC. OR EQUAL. WALL PENETRATION. HEAT TAPE AND INSULATE WHERE REQUIRED
<br /> TO PREVENT FREEZE UP. OV CA
<br /> „ w 3.4 DOOR SHALL BE NOMINAL 3 1/2" FOAWED-IN--PLACE CLASS 1,
<br /> 18'-1 D o POLYURETHANE CONSTRUCTION. 5.8 REFRIGERATION WARRANTY SHALL BE A MINIMUM OF ONE (1) YEAR PARTS L
<br /> 0
<br /> FOUR (4) YEAR COMPRESSOR WARRANTY AND NINETY (90) DAYS SERVICE. ANIE BRIAN
<br /> 3.5 DOOR TO BE HINGED, IN-FIT, AND HAVE 36" HIGH DIAMOND PLATE C0 < GO LWIN -7
<br /> 1'-2 " ; KICK PLATES FOR INTERIOR AND EXTERIOR. 5.9 HEAT SENSOR TO BE LOCATED 1'-2" ABOVE DOOR FRAME TO
<br /> ALLOW FOR GRAPHICS INSTALLATION. , C 16865
<br /> 3.6 HINGES SHALL bE CAM-RISE WITH BRIGHT SILVER ANODIZED FINISH
<br /> ON FRAME AND DOOR TRIM, TWO HINGES PER DOOR. 6.0 REFRIGERATION INSTALLATION �� REN. 8/31/17 Q
<br /> 3.7 LATCH AND STRIKE TO HAVE A SATIN SURFACE CHROME FINISH WITH 6.1 EVAPORATOR COILS SHALL BE MOUNTED FROM CEILING WITH 5/16" tiS�D ARCS\
<br /> PROVISION FOR PADLOCK. LATCH TO HAVE INSIDE SAFETY RELEASE MINIMUM FASTENERS.
<br /> TO PREVENT ENTRAPMENT.
<br /> 6.2 CONDENSING UNITS ARE MOUNTED ON THE ROOF AND MUST BE LEVEL
<br /> cp 3.8 DOOR-TO HAVE REPLACEABLE GASKETS FOR A POSITIVE SEAL AND WITH IT'S BASE ANCHORED TO PREVENT MOVEMENT. ALLOW PROPER
<br /> AN ADJUSTABLE VINYL WIPER GASKET FOR SEAL AT DOOR FRAME CLEARANCE FOR AIR SUPPLY TO AND FROM UNIT AND FOR PROPER
<br /> o THRESHOLD. MAINTENANCE ACCESS.
<br /> 3.9 A FLUSH MOUNTED 2" DIAL THERMOMETER OF CORRECT TEMPERATURE 6.3 SUCTION LINES AT TOP OF RISER ON ROOF SHALL BE SLOPED 1" PER
<br /> RANGE SHALL BE PROVIDED AT THE DOlOR. THE THERMOMETER SHALL TEN (10) FEET TO COMPRESSOR. ALL SUCTION LINES SHALL BE SIZED
<br /> BE EASILY CALIBRATED. THE THERMOMETER SENSING BULB ON THE AND TRAPPED. INSULATE TO PREVENT SWEATING.
<br /> INTERIOR OF THE DOOR SECTION TO HAVE PROTECTIVE COVER.
<br /> 3.10 LIGHTING SHALL CONSIST OF THREE VAPOR-PROOF LIGHT FIXTURES 6.4 LIQUID LINES AND SOLENOID VALVE SHOULD BE INSTALLED IN THE
<br /> TO BE FURNISHED LOSE, AND A LIGHT SWITCH WITH PILOT LIGHT LIQUID LINE JUST AHEAD OF EXPANSION VALVE IN COOLER.
<br /> FLUSH MOUNTED EXTERIOR. THE WSYSTEM SHALL BE 6.5 BRAZING SHALL BE SILVER BEARING SOLDER HIGH TEMPERATURE OR
<br /> APPROVED BY UNDERWRITERS LABORATORY.ORM. EQUIVALENT ALLOY SUITABLE FOR THIS APPLICATION. NO "SOFT
<br /> g'-D" 3.11 PROVIDE LOCKS ON DOORS AS INDICATED ON COOLER PLAN. SOLDERS" PERMISSIBLE. NITROGEN IS TO BE PURGED THROUGH THE DEVELOPMENT INFORMATION:
<br /> 02 COOLER DIMENSION PLAN SYSTEM DURING BRAZING.
<br /> 3.12 PROVIDE WALT. BUMPER GUARD ARCO NTl
<br /> - SCALE: 1/4"=1'-0" 6.6 LEAK TEST THE ENTIRE SYSTEM AFTER ALL REFRIGERATION
<br /> 4A GLASS DISPLAY DOORS: CONNECTIONS HAVE BEEN COMPLETED. LEAK TESTING SHALL BE 2900 am/pm
<br /> MANUFACTURED BY ANTHONY OR EQUAL PERFORMED WITH AN ELECTRONIC LEAK DETECTOR.
<br /> 4.1 30" X 75" H. DISPLAY DOORS (SILL ATF 7-1/2" A.F.F.) 6.7 THE SYSTEM MUST BE EVACUATED WITH A VACUUM PUMP, HAVING 26'x38CAR WASH
<br /> THE CAPABILITY OF PULLING A VACUUM OF 50 MICRONS OR LESS. FUEL CANOPY
<br /> 4.2 ENERGY SAVER CONTROLS THE PUMP SHOULD BE CONNECTED TO BOTH THE HIGH AND LOW w/ 8 MPDS
<br /> 4.3 FINISH TO BE SMOOTH BLACK. SIDES OF THE SYSTEM.
<br /> 4.4 COOLER DISPLAY DOORS SHALL HAVE 2-PANE GAS FILLED NON-HEATED, 6.8 DURING CHARGING AND START-UP MAKE SURE SHIPPING RESTRAINTS SITE ADDRESS:
<br /> INSULATED SAFETY GLASS ARE REMOVED AND ALL ELECTRICAL AND MECHANICAL CONNECTIONS
<br /> ARE TIGHT. SET HIGH LOW PRESSURE SWITCH AS REQUIRED. 1904 DANIELS STREET
<br /> 4.5 LED LIGHTING 6.9 INSTALLATION AND SERVICE OF THIS EQUIPMENT SHOULD BE
<br /> 4.6 36" DEEP SHELVES, (7) PER DOOR PERFORMED BY QUALIFIED AND EXPERIENCED REFRIGERATION @FIS
<br /> MECHANICS. INSTALL ALL EQUIPMENT, PIPING IN ACCORDANCE WITH MANTECA,CA
<br /> CKROAD
<br /> TE
<br /> 4.7 KEY CYLINDER LOCK AT EACH DOOR. LOCAL AND NATIONAL CODES AND IN CONFORMANCE WITH GOOD
<br /> 4.8 COOLER DISPLAY DOORS SHALL HAVE 3-PANE HEATED SAFETY GLASS PRACTICE REQUIRED FOR PROPER OPERATION. FACILITY # TBD
<br /> DESIGNED BY: AWANCE Z&DM:
<br /> CHECKED BY: BP REPM:
<br /> DRAWN BY: ALIJANCE PM:
<br /> VERSION: PROJECT NO:
<br /> 16932
<br /> DRAWING TITLE:
<br /> COOLER
<br /> PACKAGE
<br /> SHEET NO:
<br /> Ql
<br /> (♦
<br />
|