Laserfiche WebLink
Food Express , Inc. <br /> Certified UL 80 220 Gallon Motor Oil Tank <br /> west <br /> 0.103 0.102 0.104 0.102 0.102 <br /> 0.102 0.103 0.103 0.103 0.103 <br /> 0.104 0.105 0.104 <br /> 0.104 <br /> 0.102 0.102 0.102 0.101 0.103 0.102 <br /> 0.103 0.104 0.103 0.103 0.101 0.103 <br /> south 0.103 0.103 0.102 0.104 0.104 0.105 north <br /> 0.103 0.103 0.104 0.101 0.102 0.105 <br /> 0.102 0.104 0.104 0.100 0.102 0.103 <br /> 0.103 0.102 0.103 0.104 0.104 0.102 <br /> 0.102 <br /> 0.104 0.104 0.103 <br /> 0.104 0.102 0.103 0.103 0.104 <br /> 0.103 0.102 1 0.103 0.105 0.103 <br /> east <br /> Non-destructive wall thickness testing was performed using a certified Danatronics EHC-09 <br /> double echo solid metal thickness ultrasound test unit.Thickness calibration was perfomed <br /> prior to conducting the non-destructive metal thickness evaluation. Measurements in the <br /> boxes are the average metal thickness for the tank side or end. Each of the data readings is <br /> comprised of 1 A point measurement per 1 square foot. Readings start from the bottom <br /> curve(A) and graduate up the side (B)&(C)to just below the mid point of the tank.The <br /> average side thickness is 0.128 inches. Readings start from the bottom (A) and graduate up <br /> the side (B) & (C)to just below the mid point of the tank ends.Average tank end thickness is <br /> 0.243 inches. No metal defects were observed. <br /> Gary Reeves <br /> .dank Ins <br /> �e e.Rees f-fG <br /> Steel Ta Institude <br /> Level 1& 2 Tank and No.11111 <br /> * <br /> Systems Inspector. Exp.1/2612016 <br /> 4evel10' a <br /> Spool# 11111 SA�01 ce<' z <br /> NDT UT Level II #0001 <br /> October 10, 2012 <br />