COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Aug 06 04 08s48a T RCCUTITE 650 952-7631 p. 4 m .APT secondary test boots are designed C TM for testing the integrity of Poly-TexhTm roly— Te h secondarily-contained flexible piping, such as P-175-SC. Each boot has an Secondary t air chuck for applying air pressure to the secondary containment jacket. Placing a boot on each,end of the Boots secondary containment jacket forms an airtight chamber for testing.Amer the testing is completed,slide the boots back on the pipe to open the secondary system.The boots remain available for periodic testing as required by local regulations. •;'1 `� h Secazr o _ t dar}'Test Boo for P-050-SC through P-250-SC 0-SC S econdary dary test boots slip over the endote prior to installation of end fittings. Boots are manufactured using fuel- resistant nitrile rubber,and employ brass air chucks and stainless steel clamps for maximum corrosion resistance. Test Boo for P-300-SC Boots are easily clamped down with a P-400-SC screwdriver or 5/16"nutdriver,fo an airtight chamber between the ._ primary pipe i and the secondary jacket. The secondary chamber is pressurized Model No. Desai tion to 10 psi through the air chuck to test STB-050 Secondary Test Boat for P-050-SC Pipe system integrity. STB-075 Secondary Test Boot for P-075-SC Pipe After pressure testing,the boots remain STB-100 Secondary Test Boot for P-100-SC Pipe for future use but are ed STB-150 Secondary Test Boot for P-150-SC Pipe on the i o _ Teat Boot for P 175-SC Pipe pipe Secondary p TB 175 s back to permit back-flow of fuel leaks S ' STB-200 Secondary Test Boot for P-200-SC Pipe to the tank sump. STB-250 Secondary Test Boot for P-250-SC Pipe ATB-300 Air Test Boot for P-3o0-SC Pipe BTB,300 Blank Test Boot for P-300-SC Pipe ATB400 Air Test Boot for P-400-SC Pipe BTB4o0 Blank Test Boot for P-400-SC Pipe 27