Laserfiche WebLink
Specifications Standard Model , <br /> Operating Temp.: -25°to+130°F. Form No. Description <br /> Compatible fuels: Unleaded gasoline 848480-001 Pressurized Line Leak Detector for FE_Petro Pumps' <br /> Leaded gasoline 848480-002 Pressurized Line Leak Detector with in-line check valve <br /> 5%methanol/95%unleaded for Red Jacket d Tokheim Pum s includes line leak <br /> 10%ethanl/90%unleaded anp <br /> 15%MTBE/85%unleaded sensor,in-fine check valve,and pump port strainer) <br /> Diesel 848480-003 Pressurized Line Leak Detector with SwiitCheckn*for ` <br /> Kerosene Red Jacket and Tokheim Pumps(includes line leak <br /> Jet Fuel sensor and SwiftChec kTM check valve) <br /> Aviation gasoline 'Requires an F.E.Petro Precision Check Valve,FE.Petro Part Number <br /> Line flow rate: 120 gpm.max. 400153925. Veeder-Root check valve not required. <br /> Design: Intrinsically safe Console Compatibility <br /> Operating Range: 0-50 psi. TLS-3.50R Consoles" Series 8482 <br /> Proof Pressure: 200 psi TLS-350 Consoles Series 8470 <br /> "Pressurized Line Leak Interface Module,Form No.330373.001,and Pressurized <br /> PLLD Supported Pumps line Leak Controller Module,Form No.330374-001,required for use of PLLD with <br /> TLS-350P or TLS-350 consoles.A software enhancement module is also available <br /> Red Jacket: P33R1 (1/3 HP) to enable 0.1 gph leak detection for PLLD. <br /> P75S1 (3/4 HP) PLLD Supported Applications <br /> P150SI(1-1/2 HP) <br /> Supported Piping: Y Fiberglass-350' <br /> F.E.Petro: STPR 33(1/3 HP)' 3'Fiberglass-150' <br /> STPR 75(3/4 HP)` Y Steel-440' <br /> STPR 150(1-1/2 HP)- 1-1/2 Envirollex-400' <br /> Tokheim and Bennett: 23 psi ouput minimum Supported Applications: Siphon/Manifolded Tanks(Two Tanks- <br /> Red Jacket Big Flo: P300H3-2HB(3 HP)Only One Pump) <br /> FE Petro High Capacity: STP3(3 HP)Only Manifolded Lines(Two Tanks-Two <br /> Pumps Into Common Line) <br /> "R"designates precision check valve Electronic Blenders <br /> Contact Veeder-Root for approved piping systems <br /> No Mechanical Blenders <br /> SwiftCheckT" Typical Installations <br /> The SwiftCheckT"'valve installs into the 2'leak detector port on the Red from the check valve,install a 2'tee,and mount the Veeder-Root line <br /> Jacket or Tokheim submersible pump.The Veeder-Root line leak sensor leak probe into the tee. <br /> is then screwed into the SwiftCheck"A valve. Disable the pump's functional element by removing its spring and piston. <br /> Disable the pump's functional element by removing its spring and piston. <br /> Pressurized Line Leak Detector Installation Cable <br /> In-Line Check Valve Veeder-Root offers direct burial cable(Form No.838100-xxx)for <br /> The in-line check valve is threaded at both ends for a 2'NPT fitting and locations where conduit does not exist.See price list for ordering <br /> should be installed into the submersible pump discharge. Downstream information. <br /> SwiftCheckr"Installation Diagram In-Line Check Valve Installation diagram <br /> LINE LEAK �UNE LFAI(SENSOR <br /> SENSOR <br /> SCREW <br /> o <br /> SWIFr <br /> HECK <br /> VALVE <br /> VALVE <br /> rJ� _Z'PAPE TEE <br /> Z.1111!piEGlf VALVE <br /> VEEDER-ROOT <br /> Environmental Products <br /> The Leader in Tank Monitoring Technology <br /> 125 Powder Forest Drive,Post Office Box 2003,Simsbury,CT 06070-2003 TEL:(860)651-2700.FAX:(860)651-2719 TECH SUPPORT:(860)651-2753 <br /> BRAZIL:Sao Pablo-CANADA Mississauga.Ontario - ENGLAND:Ricnmond Surrey-FRANCE:Rungis Cacex-GERMANY:Neunausen/Filcer-SINGAPORE:Singapore <br /> onnte7 <br /> 13292 Reolaces 1318C PIN 577013-071 AR9 n 95 <br /> ,n., <br />