Laserfiche WebLink
bSpargeroAnalytical Laboratory Division <br /> 1 Technolo Mobile Laboratory Dn�ision <br /> �y lnc Scientific DNision <br /> With Automotion in Mind <br /> 1 <br /> 1 <br /> II Quality Control <br /> ' A. Project Specific QC. No project specific QC (i e , spikes and/or <br /> duplicates) was requested <br /> ' B. Method,Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations and <br /> ' procedures cause false-positive analytical results for your sample <br /> ' No target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section <br /> C. Laboratory Control ftihe. A Laboratory Control Spike (LCS) is a <br /> sample which is spiked with known analyte concentrations, and analyzed <br /> 1 at approximately 10% of the sample load in order to establish method-- <br /> specific control limits The LCS results associated with your samples are <br /> on the attached Laboratory Control Spike and Laboratory Control Spike <br /> ' Duplicate Analysis Report <br /> D Matrix Spike Results. A Matrix Spike is a sample which is spiked with <br /> 1 known analyte concentrations, and analyzed at approximately 10% of the <br /> sample load in order to establish method-specific control limits The <br /> Matrix Spike results associated with your samples are on the attached <br /> ' Matrix Spike and Matrix Spike Duplicate Analysis Report <br /> ' Accuracy is measured by Percent Recovery as in <br /> % recovery = (measured concentration) x 100 <br /> ' (actual concentration) <br /> ' !ll Analysis Results <br /> Results are on the attached data sheets <br /> 1 <br /> 1 <br />