Laserfiche WebLink
DATA QUALIFIERS <br /> B - Indicates the pound was found in the blank and the sample. <br /> E - Concentrations exceed calibration range of the instrument. <br /> I - Indicates Interf¢rence. <br /> J - Indicates an es I' aced value for either a TIC or an analyte that meets the identification criteria but <br /> the result is 1 than the specified reporting limit. <br /> T - Indicates the co pound was found in the TCLP extraction blank and the sample. <br /> u - Indicates an ino ganic compound was analyzed for but not detected. <br /> U - Indicates an or 'c compound was analyzed for but not detected. <br /> BS - Indicates matrix analyses were conducted on reagent grade water. <br /> BSD- Blank Spike Duplicate <br /> BDL- Below Detectio� Limit <br /> D - Indicates that surrogate/matrix spike recoveries were not obtained because the extract had to be diluted <br /> for analysis. <br /> DL - Indicates a seco�dary dilution <br /> DF - Dilution factor <br /> LCS- Laboratory Con l of Sample <br /> MB - Method Blank <br /> MS - Matrix Spike <br /> MSD- Matrix Spike D41icate <br /> NA - Not Applicable <br /> X - Result is by calculation <br /> NS - Not Spiked 'Result was outside advisory limits. <br /> NC - Not Calculated <br /> NR - Not Required <br /> NOTES: <br /> Solid, sediment and slu results are reported on a dry weight basis except when analyzed for Landfill disposal <br /> parameters (such as in eration or Illinois Green Sheet parameters). All other mg/kg results are reported on <br /> an "as received" basis. Reporting limits are detection limits adjusted for sample size used, dilutions made, and <br /> in the case of dry weight results, the moisture content of the sample. <br />