Laserfiche WebLink
, <br /> - 09ffMA <br /> Site Safety flan ""' <br /> ARCO Station No. 6100,Tracy, California _ <br /> Inspection,Cleaning, and Storage <br /> The respirator should be inspected, cleaned, and properly stored after use each day. The <br /> ` following steps are the basic elements of each procedure: <br /> A. Inspection <br /> f, Examine face seal for rips, tears, holes, deformation. or stiffness. <br /> 2. Examine face piece plastic center shell for cracks, missing components, or <br /> damaged threads. <br /> 3. Examine harness for breaks, cuts, frays, tears, and missing or damaged <br /> hardware. <br /> 4. Examine inhalation and exhalationves valve to close valve seats <br /> pletelyts, cracks, or <br /> Check that <br /> foreign matter which may not allow the completely- <br /> valves are properly installed and are not distorted. <br /> S. Examine cartridges for signs of abuse or damage. Discard damaged items. <br /> b. Any respirator malfunction or deficiencies noted must be reported to the <br /> Health and Safety Coordinator or Branch Safety officer who will issue anew <br /> respirator or correct the deficiencies using only approved spare parts from the <br /> manufacturer of the specific model in need of repair. Spare parts from any <br /> other manufacturer may not be used under any conditions. Instructions in the <br /> manual provided by the manufacturer should be followed when the respirator <br /> needs repairing or replacing. <br /> ,.a <br /> 13 <br /> 36041-25 <br />