Laserfiche WebLink
i <br /> RESNA Industries Inc. <br /> Quality Assurance/Quality control Plan <br /> Revised November 1992 �ff <br /> I' <br /> tubes. The bottom tube will be sealed with aluminum foil or teflon tae and d plastic end r <br /> caps, taped and labeled with the following information: <br /> ✓ date and time <br /> ✓ project ID <br /> ✓ sample ID <br /> ✓ name of sampler <br /> ✓ type of analysis to be performed <br /> I <br /> I <br /> This sample will be immediately placed into a cooler containing dry ice or frozen } <br /> chemical ice. A "high-low" temperature recording thermometer will accompany sample { <br /> shipments to ensure proper temperature maintenance. The samples will be delivered to <br /> a state certified laboratory following under chain-of-custody protocol within 48 hours of <br /> sampling, whenever possible. <br /> i <br /> Soil in the uppermost brass tube will be described according to ASTM standard practice <br /> for description and identification of soils (ASTM D-2488-84). Stratigraphic, genetic and <br /> other data/interpretations will also be recorded. Soil properties may also be determined <br /> from the middle brass tube and from the sampler shoe. Alternatively the second sample <br /> tube may be used with the uppermost tube for preparation of duplicates. These field <br /> observations will be noted on a log prepared for each boring/well. <br /> During sampling, latex gloves will be worn to prevent cross-contamination with other <br /> samples. The disposable gloves will be discarded after collecting samples from each 18- <br /> inch sample drive. <br /> k <br /> I <br /> I <br /> QAQCIM.FNL 10 t <br />