Laserfiche WebLink
KEI-P89-1104 .P2 <br /> January 10, 1950 <br /> Page 5 <br /> purgeable halocarbons using EPA method 8010, as recommended <br /> by the RWQCB, specified in the Tri-regional guidelines. <br /> Analytical results will be presented in tabular form, <br /> showing sample depths, results and detection limits. The <br /> results will be used to delineate the vertical and lateral <br /> extent of the subsurface contaminants. A cross sectional <br /> profile will be constructed as appropriate showing subsur- <br /> face lithology to depth drilled and first water table depth. <br /> Ground water flow direction will be determined from survey <br /> data and water table depths. The ground water flow direc- <br /> tion will be shown on the Site Plan. <br /> Results of Phase I will be described in a technical report. <br /> If levels of contaminants in the ground water are found to <br /> be near or below action levels, KEI will recommend a 12 <br /> month program of monthly monitoring and quarterly sampling <br /> to document the levels. <br /> If contaminant levels in the ground water are found to sig- <br /> nificantly exceed action levels, Phase II will be initiated. <br /> The technical report will be submitted to the San Joaquin <br /> County Public Health Services, and to the RWQCB, Central <br /> Valley Region. <br /> PHASE 11 <br /> Phase II will discuss the alternatives for continuing the <br /> subsurface investigation if Phase I reveals contamination levels <br /> in the ground water significantly in excess of action levels. <br /> Phase II will include a proposal for additional monitoring wells <br /> to define a zero line of ground water contamination. It will <br /> also propose a ground water monitoring and sampling program for <br /> the wells installed during Phase I. <br /> The main purpose of Phase Ii will be to establish a zero line of <br /> ground water contamination. <br /> PHASE III <br /> Once the zero line is established through the completion of Phase <br /> 11, a final remedial plan will be developed. <br /> The first step of phase III will be to conduct pumping tests to <br /> define aquifer characteristics. <br />