ARCHIVED REPORTS_XR0012618 - Laserfiche WebLink

Home Browse Search

GROUNDWATER TECHNOLOGY STANDAR] OPERATING PROCEDURE CONCERNING WATER SAMPLINC METHODOLOGY SOP 9 Prior to water sampling, each well shall be purgAd by pumping a minimum of four well volumes or until the discharge water indicates stabilization of temperature, conductivity,and pH. If the well is evacuated before four well volumes are removed or stabilization is achieved, the sample should be taken when the water level in the well recovers to 808 of its initial level. Retrieval of the water sample, sample handling and sample preservation shall be conducted in accordance with Groundwater Technology Laboratory Standard operating Procedure (GTL SOP 10) concerning Sampling For Volatiles in Water". The sampling equipment used shall consist of a teflon and/or stainless steel samplers, which meets - EPA regulations. Glass vials with teflon lids should be used to store the collected samples. To insurr, sample integrity, each vial shall be filled with the sampled water such that the water stands above the lip of the vial. The cap should then be quickly placed on the vial and tightened securely. The vial should then be checx_d to ensure that air bubbles are not present prior to labeling of '.he sample. Label information should include a sanvae identification number, job identification, date, time, type of analysis requested and the sampler's name. Chain--of-Custody forms shall be completed as per Groundwater Technology Laboratory Standard Operating { Procedure (SOP 11) concerning Chain of Custody. s The vials should be immediately placed in high quality coolers for shipment to the laboratory. The coolers should be packed with sufficient ice or freezer packs to ensure that the samples are kept below 4C. Samples which are received at the Groundwater Technology Laboratory above 10 C. will be considered substandard. To minimize sample degradation the prescribed analysis shall take place within sever. days of sample collection unless specially prepared acidified vials are used. To minimize the potential for cross contamination between wells, -all the well development and water sampling equip- ment which contacts the groundwater shall be cleaned between each well sampling. As a second precautionary measure, the wel.l.s shall be sampled in order of increasing contaminant concentrations as established by previous analysis.