Laserfiche WebLink
L-i Groundwater samples were labeled with the boring number, depth, date, time, and initialed. For <br /> example LC-1-76, where LC-I is the boring number and 76 is the sample depth in feet. <br /> Temperature, pH, and conductivity of each groundwater sample were recorded on field report <br /> forms. Drilling and sampling procedures are included in Appendix B. <br /> Following the last sample, an expendable Hydropunch tip was knocked out and the hole grouted <br /> • with 20:1 cement/bentonite grout, from the bottom up, during removal of the probe casing. <br /> All drilling and sampling equipment was washed prior to drilling. In addition, the probe casing, <br /> probe tips, screen, and bailer were decontaminated by steam cleaning between each sample. Soil <br /> cuttings were not generated during CPT drilling operations. Wash water generated during the <br /> field investigation was placed into 208-liter (55-gallon) drums approved by the United Nations <br /> for transport of liquid and solid wastes, stored in a secure area at the site pending laboratory <br /> analysis. The cone penetration test data is included in Appendix A. <br /> 2.4 Laboratory Analyses <br /> The soil and groundwater samples were submitted to Creek Environmental Laboratories, Inc., <br /> and Precision Enviro-Tech, Inc., California-certified analytical laboratories, for analysis. <br /> ' Chain-of-custody procedures, including the use of chain-of-custody farms, were used to <br /> document sample handling and transport from the time of collection to delivery to the laboratory <br /> for analysis. The chain-of-custody farms and laboratory analytical reports are included in <br /> Appendix C. Electronic laboratory data will be submitted to the State Water Resources Board <br /> GeoTracker Site. The confirmation number will be provided at that time. <br /> The analyses were conducted on a normal turn-around basis in general accordance with <br /> U. S. Environmental Protection Agency (EPA) specified holding times. The analyses were <br /> ti► performed in general accordance with the following EPA methods: <br /> Matrix Analyses <br /> Soillwater Gasoline Analysis Package EPA Method 8015/8020 <br /> W Soillwater Total Petroleum Hydrocarbons as Diesel Modified EPA Method 8015 <br /> Soillwater Aromatic and Halogenated Volatile Organics EPA Method 8021 B <br /> Soillwater GC/MS Fuel Oxygenate Compounds EPA Method 8260B <br /> LW <br /> 2.5 Investigation-Derived Waste Disposal <br /> LM Drill cuttings were not generated during this investigation. <br /> ;. <br /> + Infamabw TacMWoV4WCRFP>iCO"Mse[0MWAPWJ918M5178.188.dw 2-3 <br /> 4W2 <br /> 4W <br />