Laserfiche WebLink
} <br /> ' I I <br /> S � 1 <br /> - g .. <br /> "low, <br /> Spar er Analytical Laboratory Division <br /> Mobile Laboratory Division <br /> - .. <br /> TechnologyInc. Scientific Division <br /> Witt,4utomorion in Nbri <br /> L <br /> L <br /> Ill . (duality Control j <br /> A. Pro'ect Specific QC. No project specific QC (i.e., spikes and/or <br /> duplicates) was requested. <br /> L Method Blank Results. A method blank is a laboratory-generated <br /> B. <br /> sample which assesses the degree to which laboratory operations and <br /> Lprocedures cause false-positive analytical results for your sample. <br /> No target parameters were detected in the method blank associated with <br /> t your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section. <br /> C. Laboratory Control Spike. A Laboratory Control Spike (LCS) is a <br /> I <br /> r sample which is spiked with known analyte concentrations, and analyzed <br /> at approximately 10% of the sample load in order to establish method- <br /> specific control limits. The LCS results associated with your samples are <br /> on the attached Laboratory Control Spike and Laboratory Control Spike <br /> Duplicate Analysis Report. <br /> D. Matrix Spike Results. A Matrix Spike is a sample which is spiked with <br /> known analyte concentrations, and analyzed at approximately 10% of the <br /> sample lead in order to establish method-specific control limits. The <br /> Matrix Spike results associated with your samples are on the attached <br /> LMatrix Spike and Matrix Spike Duplicate Analysis Report. <br /> Accuracy is measured by Percent Recovery as in- <br /> % recovery = measured concentration x 100 <br /> r (actual concentration) <br /> L <br /> IV Analysis Results <br /> Results are on the attached data sheets. <br /> L <br /> L <br /> 3050 Fire ClICIB, Suite -- e .,,?: ? .:r rc`;>: }. ._.::i= ,r,rr_1 :"r'�'',- • .(916) 362-8947 w FAX (996) 362-0947 <br />