Laserfiche WebLink
N. Joist Hangers Framing Clips Post Caps etc.: Simpson, Teco, or equal. Galvanized steel, <br /> 2 not lighter in gauge than the following: <br /> 3 <br /> 4 Joist Hangers: <br /> 5 For 2 inch thick members 16 gauge <br /> 6 For 3 inch and thicker members 12 gauge <br /> 7 Framing Anchors 18 gauge <br /> 8 Framing Clips 16 gauge <br /> s Reinforcing angles 16 gauge <br /> 1 10 Post Caps 16 gauge <br /> 11 Post Bases 12 gauge <br /> 12 Tie Straps As noted on Drawings <br /> 13 <br /> 14 2.03 OTHER MATERIALS <br /> 15 <br /> 16 Provide other materials, not specifically described but required for a complete and proper <br /> 17 installation, as selected by the Contractor subject to the approval of the Engineer. <br /> 16 <br /> 19 <br /> 20 PART 3: EXECUTION <br /> 21 <br /> 22 3.01 SURFACE CONDITIONS <br /> 23 <br /> 24 Examine the areas and conditions under which work of this Section will be performed. <br /> 25 Correct conditions detrimental to timely and proper completion of the Work. Do not <br /> 26 proceed until unsatisfactory conditions are corrected. <br /> 27 <br /> 23 3.02 DELIVERIES <br /> 29 <br /> 30 A. Stockpile materials sufficiently in advance of need to assure their availability in a timely <br /> 31 manner for this Work. <br /> 32 <br /> 1 33 B. Make as many trips to the job site as are needed to deliver materials of this Section in a <br /> 34 timely manner to ensure orderly progress of the Work. <br /> 35 <br /> 36 3.03 COMPLIANCE <br /> 37 <br /> 38 A. Do not permit materials not complying with the provisions of this Section to be brought onto <br /> 39 or to be stored at the job site. <br /> 40 <br /> 41 B. Promptly remove non-complying materials from the job site and replace with materials <br /> 42 meeting the requirements of this Section. <br /> 43 <br /> as 3.04 WORKMANSHIP <br /> 45 <br /> 46 A. Produce joints which are tight, true, and well nailed, with members assembled in <br /> 47 accordance with the Drawings and with pertinent codes and regulations. <br /> ROUGH CARPENTRY <br /> 042894 061003 <br />