Laserfiche WebLink
SECTION 07210 <br /> z <br /> 1 3 BUILDING INSULATION <br /> 4 <br /> 5 <br /> s PART 1: GENERAL <br /> 7 <br /> s 1.01 DESCRIPTION <br /> s <br /> to The work of this section consists of furnishing and installing wall and ceiling insulation. <br /> 11 <br /> 12 1.02 SUBMITTALS <br /> 13 <br /> 14 A. In accordance with Section 01300. <br /> 15 <br /> 16 B. Submit samples of each material to be used, clearly identified with manufacturer's name, <br /> 17 brand name, R or K value, and composition. <br /> 1s <br /> 19 1.03 PRODUCT HANDLING <br /> 20 <br /> 21 Deliver materials to project site in original packaging. Store materials off ground. Protect <br /> 22 against weather, condensation, and damage. <br /> 23 <br /> 24 <br /> 25 PART 2: MATERIALS <br /> zs <br /> 27 2.01 CONCEALED WALL AND CEILING INSULATION <br /> 28 <br /> 29 Foil faced fiberglass batts: ASTM C-665, Type III, Class B and ASTM C-1136 friction fit type, <br /> 30 with an installed thermal resistance of R=11 for walls and R=19 for ceiling. <br /> 31 <br /> 32 2.02 FASTENERS <br /> 33 <br /> 34 Plated steel staples, plastic tape, and other fastening devices required to insure tight fitting <br /> 35 insulation. <br /> 3 <br /> 377 <br /> 39 PART 3: EXECUTION <br /> 39 <br /> ao 3.01 INSTALLATION <br /> 41 <br /> 42 Provide insulation at all ceilings, at all wood framed walls, and at concrete masonry walls <br /> 43 designated to receive furring, where called for on the Drawings. Fit insulation snugly <br /> 44 between framing, maintaining integrity of insulation over entire area to be insulated. <br /> 45 Insulate small areas between closely spaced framing members. Carefully cut insulation and <br /> 46 fit around pipes, conduits, and other obstructions. Where pipes or conduits are located in <br /> 47 stud spaces, place insulation between exterior wall and pipe. Install vapor barrier towards <br /> 4e the conditioned room side. <br /> 49 <br /> 50 END OF SECTION <br /> BUILDING INSULATION <br /> 0506s4 07210-1 <br />