INSTALL_2011 - Laserfiche WebLink

Home Browse Search

Hydrostatic Sensor For use with Veeder-Root 300 & 350Seriestank gauges Veeder-Root's Hydrostatic Reservoir Sensor accurately detects fluid level change in the Features reservoir and interstice of a double-wall Dual-Point Sensor alarm conditions: storage tank or line. Dual-point and single- • Leak in inner wall triggers a low level alarm point technology models are ideal for loca- •Leak in outer wall triggers a high level alarm in high groundwater areas;low level tions with high or low water tables. alarm in low groundwater areas. • Designed to meet California's requirement for secondary space monitoring for The Dual-Point Hydrostatic Sensor is ideal for tanks and lines as required by All 2481. high groundwater areas,and can differentiate Single-Point Sensor alarm conditionst: between a high-level alarm condition and a •Leak in inner or outer wall triggers a low level alarm in low groundwater areas. low-level alarm condition. If an inner-wall •Designed to meet California's requirement for secondary space monitoring for leak occurs,the brine solution seeps into the tanks as required by AB 2481. tank or line primary space lowering the brine level in the reservoir. The Dual-Point Sensor Temperature Rating Single-Point Sensor Dimensions: will then trigger a low level alarm. If an outer- Storage: 6.0" high, 2.5" diameter wall leak occurs,the groundwater seeps into -40 degrees C to+60 degrees C the reservoir.The Dual-Point Sensor will then Dual-Point Sensor Dimensions: trigger a high level alarm. Operating: -25 degrees C to+50 degrees C 17.3"high,2.5"diameter The Single-Point Sensor is ideal for low Rests in salt brine solution of up to 30% a Withstands removal from reservoir groundwater areas,since it only detects low- calcium chloride several times a year without sensor level alarm conditions. If an inner wall leak damage occurs, the brine solution seeps into the Cable length: •Clear plastic housing for visual tank. If an outer-wall leak occurs,the brine 12 feet inspection of float operation solution leaks out of the tank. In both cases, the brine level decreases and the Single- Standard Models Point Sensor triggers a low level alarm.This Sensor Form Number:794380-301 Sensor should not be used to monitor the Description: Single-Point Hydrostatic Reservoir Sensor secondary space of a pressurized line. Sensor Form Number:794380-303 Description: Dual-Point Hydrostatic Reservoir Sensor Hydrostatic Reservoir Sensor Console Capability The Series 7943 Hydrostatic Reservoir Sensor is compatible with the following consoles: Console Sod" TLS-350R' 8482 TLS-350YTLS-350J' 8470 TLS-3001 8485 'Note: An Interstitial Sensor Interface Module is required for the use of the Hydrostatic Sensors with the TLS-350,TLS-350],EMC and TLS-350R Consoles. Singlc-Point Sutnp Sensor shown in 6.0" For more information call configuration length. 1-888-561-7942 eiVEEDER-ROOT ®2003 Veeder-Root Company " 125 Powder Forest Drive " Simsbury,CT 06070 " USA Telephone:860-651-2700 " Fax:860-651-2719 " www.veeder.com VR 13747 PM 0576047-067 Rev.A VR32003 Printed in USA