Laserfiche WebLink
WATERTIGHT SUMP LID ASSEMBLIES <br /> Selecting the right UL listed single-wall or double-wall tank <br /> sump has never been easier. You simply choose the sump <br /> dimensions and level of protection you need for your project <br /> and then choose the lid based on the tank configuration. <br /> TURBINE TANK SUMP LIDS <br /> Turbine tank sump lids are used at the submersible turbine <br /> end of the tank when access is infrequent and the area must <br /> be watertight.The turbine lid is made of rigid fiberglass and <br /> fits into place by simply pushing down on the lid.Comfort grip <br /> TURBINE LID handles make removal of the lid convenient. <br /> FILL/VAPOR TANK SUMP LIDS <br /> Fill/Vapor tank sump models are available for the fill-end of the <br /> tank when multi-port manholes are used.We offer two access <br /> opening options to accommodate the most popular shroud <br /> boots and spill containment systerns. <br /> Both configurations include an observation port allowing easy <br /> access for internal sump inspections. <br /> WATER TESTED AND WATERTIGHT <br /> Each lid assembly is tested to Il'of hydrostatic head pressure <br /> to ensure a watertight seal. Accessing either lid is possible <br /> FILL/VAPOR LID through a standard 36"manhole. <br /> w/15"ACCESS OPENINGS <br /> &6"OBSERVATION PORT <br /> The observation port is a convenient access point to inspect the monitoring <br /> sensor ondouble-wall sump models and perform a visual inspection of the sump <br /> interior. <br /> z <br /> n <br /> A <br /> FILL/VAPOR LID <br /> w/13"ACCESS OPENINGS <br /> &6"OBSERVATION PORT <br /> r <br /> 5 WATERTIGHT LIDS <br />