Laserfiche WebLink
APPENDIX D <br /> PROTOCOL FOR OBTAINING WATER SAMPLES <br /> FROM EXPLORATION BORINGS <br /> 1.0 INTRODUCTION <br /> This protocol describes procedures to be followed for collecting water samples in conjunction <br /> with the installation of exploration borings in the vicinity of the project site. Selected <br /> groundwater samples will be submitted to a designated subcontracted laboratory for chemical <br /> analysis. The subcontracted laboratory must be certified by the California Department of Health <br /> Service (DHS) for the analyses requested. The procedures presented herein are intended to be <br /> Lof'general use. As the work progresses and if warranted, appropriate revisions will be made, <br /> and approved in writing by the Boyajian & Ross, Inc. (B&R) project manager. <br /> 2.0 ADVANCEMENT OF BORINGS <br /> LTl a advancement and backfilling of soil borings will be in accordance with the protocol <br /> presented in Appendix B. <br /> 3.0 SAMPLING AND LOGGING <br /> Groundwater samples will be collected in accordance with the protocol presented in Appendix <br /> B.`i A sample bottle, provided by the subcontracted laboratory, will be filled to overflowing to <br /> avioid trapping air at the top of the container. A cap will be screwed on tightly immediately <br /> after filling the bottle and checked to verify no headspace is present. The samples will then be <br /> labeled and placed in an ice-cooled chest immediately following collection. Rubber gloves will <br /> r- be;warn by field personnel while collecting groundwater samples. <br /> L A'water quality sampling record (Figure D-1) will be used to record the following information: <br /> L <br /> o Sample number (or name). <br /> Lo Date and time sampled. <br /> O Boring designation. <br /> o Project's name, or other common designation for water supply wells. <br /> L <br /> D — l DA98117TROTOCOLMIFN <br /> BOYAJIAN & ROSS, INC. <br /> Environmental Scientists & Engineers <br />