Laserfiche WebLink
Health and Safety Plan for <br /> Delineation and Destruction of Well B-1 <br /> 7 DECONTAMINATION PROCEDURES <br /> Decontamination procedures will be performed before leaving the work areas as part of the <br /> system for preventing or reducing the physical transfer of impacted materials from the project <br /> area. Physical decontamination procedures may include removing PPE, gloves, boots, brushing, <br /> vacuuming, washing with detergent, neutralizing agents, etc. Primary decontamination will take <br /> place in the Contamination Reduction Area. All PPE that has been removed in the Contaminant <br /> Reduction Area will be placed in a secured 55-gallon drum. In the Contamination Reduction <br /> Area, equipment and PPE may be washed with water and/or soap. Secondary decontamination, if <br /> required, will take place at portable hand washing facilities in the Support Area. All personnel <br /> will wash their hands before eating and after work. <br /> Personnel decontamination procedures should be performed in the following sequence: <br /> • If gross contamination is obvious, physically remove contamination by brushing, <br /> scraping, etc., prior to leaving the Exclusion Area; <br /> • Transfer the equipment to the Contamination Reduction Area for subsequent chemical <br /> decontamination or disposal; <br /> • In the Contamination Reduction Area, remove any outer disposable PPE and discard into <br /> the appropriate disposal drum; and <br /> • In the Support Area, thoroughly wash hands and face. <br /> 10275-4 <br /> D U D E K 23 June 2017 <br />