WORK PLANS - Laserfiche WebLink

Home Browse Search

Job Steps Hazards Controls RAC Mobilization/ Site Set Up Slips, Trips, Falls Clear trees, roots, weeds, limbs and other ground hazards L from the drilling location. Practice good housekeeping to keep the ground around the drilling site clear of obstructions, equipment, and other tripping hazards. Wear appropriate foot protection to prevent slips and trips. Use caution when working on uneven and wet ground surfaces. • General equipment hazards • All equipment will be properly secured during transport. • Overhead and underground • All vehicles and equipment will comply with DOT utilities requirements. • Noise Hazard • Never move the hydraulic push rig with the mast upright. • Pinch points/swing radius Ensure the sampling site foundation is stable and as level as • Chemical exposure potential possible. • Eye Injury • Use a ground guide along with a functioning back-up alarm • Fire during equipment backing. • Confirm Utility Locations • Inspect vehicles and equipment daily(Checklists provided in HASP) • Maintain clean and organized work area. • Wear appropriate clothing and PPE, (no loose clothing or jewelry) • Earplugs and/or ear muffs required in EZ • Position the drill rig and personnel up wind of drilling location • Monitoring breathing zone with PID and upgrade PPE as required. • Avoid creating splash hazards while drilling. • Keep a safe distance from drill rig. • Use hand signals, keep clear of moving equipment, and ensure eye contact with operator prior to approaching. • Have fire extinguisher on site. • Contact with utilities • Inspect for buried and overhead utilities in the vicinity of the drilling location. Clearance will be required, as stipulated in the HASP. • Traffic in adjacent roadway • Use combination of vehicles, cones, traffic barriers, and caution tape Boring Process • Cuts • Wear appropriate work gloves to prevent cuts, lacerations M • Dermal Contact • Wear appropriate protective clothing to avoid dermal or personal clothing contact with sampled material.