Laserfiche WebLink
Job Steps Hazards Controls RAC <br /> 2. Boring Process a. Sharp/Jagged edges 1. Avoid contact with sharp/jagged edges. Use work gloves. M <br /> b. Dermal Contact 2. Position body to avoid contact with sampled material. <br /> Wear protective clothing (Tyvek suit) if dermal contact with <br /> sampled material is unavoidable. <br /> c. Slips, Trips, Falls 3. Clear trees, roots, weeds, limbs and other ground hazards <br /> from the drilling location. Practice good housekeeping to <br /> keep the ground around the drilling site clear of <br /> obstructions, equipment and other tripping hazards. Wear <br /> slip resistant foot wear. Use caution when working on <br /> uneven and wet ground surfaces. <br /> d. Volatile Organic Compounds 4. If the results of previous surveys indicate the presence of <br /> VOC's in hazardous levels, rig operators should be <br /> prepared to protect both personnel and equipment for <br /> VOC inhalation and flammable atmospheres. <br /> e. Underground utility strike 5. Inspect for buried and overhead utilities in the vicinity of <br /> the drilling location. Follow the subsurface underground <br /> utility checklist process. <br /> SP-110-A3 JHA Rev. 1 090118 <br />