Laserfiche WebLink
Anivricart Ernvironniental Network <br /> PAGE 6 <br /> ii <br /> AEN (CALIFORNIA) <br /> QUALITY CONTROL REPORT <br /> AEN JOB NUMBER: 9604398 <br /> CLIENT PROJECT ID. 41820-003-00 <br /> Quality Control and Project Summary. <br /> 'All laboratory quality control parameters were found to be within established <br /> limits. <br /> Definitions <br /> IF Laboratory Control Sample (LCS)/Method Spike(s): YControl samples of known composition. LCS and Method Spike <br /> data are used to validate batch analytical.results. <br /> Matrix Spike(s): Aliquot of a sample (aqueous or solid) with added quantities of specific compounds and <br /> ,subjected to the entire analytical procedure. Matrix spike and matrix spike duplicate GC data are advisory. <br /> Method Blank: An analytical control consisting of all reagents, internal standards, and surrogate standards <br /> carried through the entire analytical process. Used to monitor laboratory background and reagent contamination. <br /> :Not Detected (ND): Not detected at or above the reporting limit. <br /> Relative Percent Difference (RPD): An indication of method precision based on duplicate analysis. <br /> Reporting Limit (RL): The lowest concentration routinely determined during laboratory operations. The RL is <br /> generally 1 to 10 times the Method Detection Limit (MDL). Reporting limits are matrix, 'method, and anatyte <br /> dependent and take into account any dilutions performed as part of the analysis. <br /> Surrogates: organic compounds which are similar to analytes of„interest in chemical behavior, but are not found <br /> in environmental samples. Surrogates areaddedto all blanks; calibration and check standards, samples, and <br /> `spiked samples. Surrogate recovery is monitored as an indication of acceptable sample preparation and <br /> ;instrumental performance. <br /> D: Surrogates diluted out. <br /> #: Indicates result outside of established laboratory Qc limits. <br />