Laserfiche WebLink
Revision date:3/18/2018 Revision:4 Supersedes date:12/22/2016 <br /> Granufin Black <br /> Advice on general Wash promptly if skin becomes contaminated.Take off contaminated clothing and wash <br /> occupational hygiene before reuse.Wash contaminated clothing before reuse. Do not eat,drink or smoke when <br /> using this product.Wash at the end of each work shift and before eating,smoking and using <br /> the toilet.Change work clothing daily before leaving workplace. <br /> Conditions for safe storage,including any incompatibilities <br /> Storage precautions Store in accordance with local regulations. <br /> Storage class Unspecified storage. <br /> Specific end uses(s) <br /> Specific end use(s) The identified uses for this product are detailed in Section 1. <br /> 8. Exposure controls/Personal protection <br /> Ingredient comments Total respirable dust 3 mg/m3-8hr TWA.Total Inhalable Dust 10mg/m3-8hr TWA. <br /> Exposure controls <br /> Protective equipment <br /> 010 <br /> Appropriate engineering Provide adequate ventilation. Good general ventilation should be adequate to control worker <br /> controls exposure to airborne contaminants. <br /> Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates <br /> eye contact is possible. Personal protective equipment for eye and face protection should <br /> comply with OSHA 1910.133. No specific eye protection required during normal use. <br /> Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if <br /> a risk assessment indicates skin contact is possible.The most suitable glove should be <br /> chosen in consultation with the glove supplier/manufacturer,who can provide information <br /> about the breakthrough time of the glove material.To protect hands from chemicals,gloves <br /> should comply with OSHA 1910.138 and be demonstrated to be impervious to the chemical <br /> and resist degradation. Considering the data specified by the glove manufacturer, check <br /> during use that the gloves are retaining their protective properties and change them as soon <br /> as any deterioration is detected. Frequent changes are recommended. <br /> Other skin and body Appropriate footwear and additional protective clothing complying with an approved standard <br /> protection should be worn if a risk assessment indicates skin contamination is possible. <br /> Hygiene measures Provide eyewash station and safety shower. Contaminated work clothing should not be <br /> allowed out of the workplace.Wash contaminated clothing before reuse. Clean equipment <br /> and the work area every day. Good personal hygiene procedures should be implemented. <br /> Wash at the end of each work shift and before eating,smoking and using the toilet.When <br /> using do not eat,drink or smoke. <br /> Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk <br /> assessment indicates inhalation of contaminants is possible. Provide adequate ventilation. <br /> Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn. <br /> Environmental exposure Not regarded as dangerous for the environment. <br /> controls <br /> 9. Physical and chemical properties <br /> Information on basic physical and chemical properties <br /> 4/9 <br />