Laserfiche WebLink
YOUR NEW PRESSURE-VACUUM SOIL WATER SAMPLER <br /> Unpacking Remove all packing materials and check the Soil Water Sampler <br /> for any damage that may have occurred during shipment. <br /> If the Sampler is damaged, call the carrier immediately to report <br /> it. Keep the shipping container and all evidence to support your <br /> claim. <br /> Assembly The standard 1920F1 Pressure-Vacuum Soil Water Sampler was <br /> assembled prior to shipment. <br /> If you purchased the 1920FlKl Pressure-Vacuum Soil Water <br /> Sampler Kit because your application requires you to clean the <br /> sampler before installation,we have shipped the Sampler partially <br /> assembled. The porous ceramic cup has been bonded to the PVC <br /> tube (tube assembly) and the dip tube has been bonded to the top <br /> cap (top cap assembly). You must assemble the Sampler as fol- <br /> lows. <br /> The 1920FlKl Sampler is assembled after cleaning by glueing <br /> the top cap assembly to the tube assembly. Dip a Q-tip or pipe <br /> cleaner into the separately purchased Epoxy(part no.0980V).The <br /> Epoxy Kits can be purchased in three sizes: 4 oz; 16 oz; or 32 oz. <br /> depending on your needs.Apply a thin layer to both the inside of <br /> the tube assembly where the top cap is inserted and to the outside <br /> area of the top cap assembly where it fits into the PVC tube.Insert <br /> the top cap assembly into the tube assembly and let the freshly <br /> glued Sampler sit for 24 hours to allow the glue to harden com- <br /> pletely.Once the glue has set,the Sampler is ready to test for leaks <br /> (see page 9,"Pressure Testing Before Installation" for further de- <br /> tails). <br /> All other accessory items necessary for proper use are discussed <br /> later in these instructions and are listed on page 16. Please read <br /> all instructions thoroughly before installing the Sampler. To as- <br /> sure optimum cleanliness of the assembly, no grease or organic <br /> solvents have been used in its manufacture. <br /> Not Liable for Improper Use Soilmoisture Equipment Corp.is not responsible for any damage, <br /> actual or inferred, for misuse or improper handling of this equip- <br /> ment.The Pressure-Vacuum Soil Water Samplers,Models 1920F1 <br /> and 1920FlKl,are to be used solely as directed by a prudent indi- <br /> vidual under normal conditions in the applications intended for <br /> this equipment. <br /> SOILMOISTURE EQUIPMENT CORP. 7 \� <br /> P.O. Box 30025, Santo Bafbaro,Collfomio 93105 USA / \ <br /> Phone:(805)964-3525•Fox:(805)683-2189 SOILMOISTURE <br /> e-mail:soles®soilmoisture.com• Web:http://www.soilmoistufe.com <br />