Laserfiche WebLink
SWRCB, January 2002 <br />5. SECONDARY PIPE TESTING <br />Page of <br />Test Method Developed By: <br />X Piping Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Spec) <br />Test Method Used: <br />X Pressure <br />❑ Other (Sped) <br />❑ Vacuum <br />❑ Hydrostatic <br />Test Equipment Used: Pressure Gauges in Psi/Nitrogen <br />Piping Run #1 <br />Piping Run #2 <br />Equipment Resolution: 1/10-15 Psi <br />Piping Run# Piping Run# <br />rPipingial: <br />Poly Plastic <br />Poly Plastic <br />facturer: <br />APT <br />APT <br />Piping Diameter: <br />1 '/2" <br />1 '/2" <br />Length of Piping Run: <br />Approx. 32' <br />Approx. 32' <br />Product Stored: <br />Fuel Oil <br />Fuel Oil <br />Method and location of <br />piping -run isolation: <br />Test boot at <br />Piping Sump <br />Test boot at <br />Piping Sum <br />Wait time between applying <br />pressure and startingtest: <br />5 Minutes <br />5 Minutes <br />Test Start Time: <br />11:20 <br />11:20 <br />Initial Reading (RI): <br />5.1 Psi <br />5.4 Psi <br />Test End Time: <br />12:20 <br />12:20 <br />Final Reading (RF): <br />5.1 Psi <br />5.4 Psi <br />Test Duration: <br />1 Hour <br />1 Hour <br />Change in Reading (RF -RI): <br />0 Psi <br />0 Psi <br />Pass/Fail Threshold or <br />Criteria: <br />No Loss in Psi <br />No Loss in Psi <br />Test Result: <br />X Pass ❑ Fail <br />X Pass ❑ FaiI <br />Pass ❑ Fail Pass ❑Fail <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />System is Suction Supply and Gravity Return for Emergency Generator. <br />