Laserfiche WebLink
e � <br /> SWRCB,January 2002 <br /> 10. FILL RISER CONTAINMENT SUMP TESTING RE66VED <br /> Facility is Not Equipped With Fill Riser Containment Sums ❑ APR 11 2014 <br /> Fill Riser Containment Sumps are Present,but were Not Tested X <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard ❑Pr <br /> ENVip <br /> ❑Other(Spec) HEALTH DE ENT <br /> Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time: <br /> Initial Reading(Rj): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-RI): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result:' <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testinNand Was sensor properly replacedverified functional after testin <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />