Laserfiche WebLink
9 0 <br /> R&D Compliance Testing <br /> Secondary Containment/SB989 (707)621-0378 <br /> Line/Leak Detectors <br /> Tank Monitor Certification <br /> California UST Certified Operator#5246802-UC <br /> California UST Service Technician#5246802-UT <br /> SWRCB Tank Testing License#90-1120 <br /> Date: March 22, 2012 <br /> To: Joe Bagley, General Manager <br /> Bagley Enterprises, Inc. <br /> Joe, after review of the notes form the Local CUPA, concerning the Diesel Master and <br /> Satellite Secondary Containment Piping Test Seal off Boots, I reviewed the last <br /> Secondary Containment Test Report and determined that measurements taken on both the <br /> Master Dispenser and Satellite Dispenser Penetrations for the Secondary Containment <br /> Piping, show a 1" slop from the Satellite Dispenser to the Master Dispenser. I understand <br /> the concern that the Test Seal off Boots are in place and that the Schrader Valve in the <br /> Master Dispenser Pan is pointing up, with the needle Valve removed. After review of the <br /> concern by the Local CUPA and you, I went to the location, confirmed the slope and <br /> attached a hose to the Schrader valve on the Test Seal off Boot in the Master Dispenser <br /> Sump, and rotated the Boot down, to allow the flow of any product that may leak from <br /> the primary piping into the Secondary Piping to flow unrestricted to the Sensor located in <br /> the Master Dispenser Pan. This will allow both earliest detection of liquid and future <br /> ease of Routine Testing at the location. It is my sincere hope that my efforts have <br /> satisfied both the Local CUPA's concerns and yours. I have attached Photo's to this <br /> correspondence to assist in the description of the comments above. If you or the Local <br /> CUPA has further concerns, I can be reached at(707) 621-0378. <br /> Sincerely, <br /> Benjamin F. Duncan Jr. <br /> R&D Compliance Testing <br /> Owner General Manager <br /> SWRCB License#90-1120 <br /> P.O. Box, 1503, Ukiah, Ca. 95482 <br />