Laserfiche WebLink
1 Monitoring System Certification-Page 2 of 3 <br /> Site Address: 2701 March Ln. Date of Testing/Servicing: 1/14111 <br /> D. Results of Testing/Servicing <br /> Software Version Installed- 3 3 <br /> Complete the follo ing checklist: <br /> Yes ❑ No* Is the audible alarm operational? <br /> Yes ❑ No* Is the visual alarm operational? <br /> D,Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> a Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ❑ Yes ❑ bio* If alarms are relayed to a remote monitoring station, is all communications equipment(e.g.modem) <br /> N/A operational? <br /> ❑ Yes ❑/No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment <br /> 0'N/A monitoring system detects a leak, fails to operate,or is electrically disconnected? If yes:which sensors initiate <br /> positive shut-down? (Check all that apply) ❑ Sump/Trench Sensors; ❑ Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ❑ Yes ❑ No <br /> W—Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no <br /> ❑ N/A mechanical overfill prevention valve is installed),is the overfill warning alarm visible and audible at the tank <br /> fill oint(s)and operating property? If so,at what eercent of tank capacity does the alarm trigger? FO % <br /> ❑ Yes* S No Was any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> ❑ Yes* 15 No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br /> ❑ Product;❑ Water. If yes,describe causes in Section E,below. <br /> Yes ❑ No* Was monitoring system set-up reviewed to ensure pro2er settings? Attach set-up reports, if applicable.) <br /> Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: ��S"-( <br /> a.k f e, <br />