COMPLIANCE INFO_2010-2011 - Laserfiche WebLink

Home Browse Search

dh Monitoring System Certification-Page 2 of 3 Site Address: 2701 March Ln. Date of Testing/Servicing: 3131111 D. Results of Testing/Servicing Software Version Installer 330.02 Complete the follo ine checklist: ® Yes ❑ No* Is the audible alarm operational? a Yes ❑ No* Is the visual alarm operational? ® Yes ❑ No* Were all sensors visuall ins ected,functionally tested,and confirmed operational? ® Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ® Yes ❑ No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem) ❑ N/Ao erational? 2 Yes ❑ No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment ❑ N/A monitoring system detects a leak,fails to operate,or is electrically disconnected? If yes:which sensors initiate positive shut-down? (Check all that apply) ® Sump/Trench Sensors; ❑ Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ® Yes ❑ No ® Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no ❑ N/A mechanical overfill prevention valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and oRerating properlyg. If so,at what percent of tank capacity does the alarm trigger? 90 % a Yes* ❑ No Was any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E,below. ❑ Yes* ® No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) ❑ Product;❑ Water. If yes,describe causes in Section E,below. ® Yes ❑ No* Was monitoring system set-4p reviewed to ensure proper settings? Attach set-up reports,i licable. ® Yes.. .❑ No* Is all monitoring equipment operational per manufacturer's specifications? *In Section E below,describe how and when these deficiencies were or will be corrected. E. Comments: Replaced TLS Software. Float and chain on disp 314 not working properly.Needs to be replaced and re-tested with agency.Disp Is bagged out at this time for repair.All else passed at this this time. 411/11 - Able Maintenance replaced float and chain in Disp 314 with inspector.Tested and passed.