Laserfiche WebLink
SWR"CB, January 2002 Page of <br /> 7. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# FiII Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading(RI): <br /> Test End Time.- <br /> Final <br /> ime:Final Reading(RF): <br /> Test Duration: <br /> Change in Reading F-RI): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: ❑'Pass ❑ Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑'Fail <br /> Is there a sensor in the sump? ❑Yes DNo ❑Yes ❑NTo ❑Yes ❑No ❑ Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is -Yes ❑N o DNA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> detected? <br /> Was sensor removed for testing? -Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Was sensor properly replaced and <br /> Yes <br /> verified functional after testing? ❑No 0 N ❑Yes ❑No ❑NA ❑Yes ❑No __j'NA U Yes ❑No ❑NA <br /> t <br /> Comments—(inchzde information on repairs made prior to testing and recommended follow-zip for failed tests) <br />