COMPLIANCE INFO_1997-2012 - Laserfiche WebLink

Home Browse Search

Installation Guide 0 Test of the Leak Detector • If flow is restricted to about 3 gpm (11 Ipm)or less with the nozzle open,the leak detector has not opened.Repeat Step 8a with increased running time of pump to insure the purging of all air.All air must be purged from the system or the leak detector will restrict flow to about 3 gpm. 9. Affix the enclosed decals to the dispenser dial glass on grade of gasoline upon which the leak detector is being installed.Additional decals are available;call customer service at 1-800-873-3313 and request P/N 046-200-1. 10. Inspect all threaded joints to assure they are tight and not leaking. Test of the Leak Detector U.S.Environmental Protection Agency(EPA)regulations require annual verification of operation of leak detector.To assure maintenance of leak detection capability.Red Jacket requires that operation of the - - --- - - -mechanical leak detector be verified by testing upon start-up and that testing of the leak detector be performed routinely,at least annually. ELI L911 ON Test procedure options for mechanical leak detectors are explained in Red Jacket Engineering Reports, RJ20 and RJ21.The Red Jacket Snap Tap Connectors allow the FX2V/FX2DV leak detector to be tested with the FXV Snap Tap Tester as an option to the above test methods.See Red Jacket literature#042=111-1 for test instructions using Snap Tap Connectors. - - 11._The top cover onthe RedJacket leakdetectorisdesignedto accommodate-a sealing wire which can be usedto discourage tampering of the unauthorized removal of leak detector.(see Figure 4). • ° If the dispensing system(the solenoid valve and the nozzle)is opened previous to the completion of the line test;the FXV Series will detect this opening as a leak and restricted flow will result.Closing of the nozzle(s)for a period of time adequate to allow completion of the,line_test will allow the leak detector_to open.Once opened,full pump flow can be provided. FX2V/FX2DV Tethered cap O Sealing wire J Snap Tap © (provided by 45°elbow contractor)_ - o 1/4-inch T-fitting SIDE VIEW TOP VIEW o Vent tube Figure 4.Installing FXV in the Standard pump 6