Laserfiche WebLink
1W IRW <br />PRODUCT PIPING SUMP TESTING <br />Test Method By: <br />O Manufacturer <br />• Industry Standard <br />o Professional Engr o Other (see below) <br />Test Method Uses: <br />o Pressure <br />o vacuum <br />• Hydrostatic o Other (see below) <br />Measuring Equipment Used: INCON <br />TS -STS (Electronic Sump Test System) <br />Description <br />Tank #1 <br />Tank #2 <br />Tank #3 <br />Tank product <br />Gasoline - 87 <br />Gasoline - 91 <br />Diesel <br />Sump material <br />FRP <br />FRP <br />FRP <br />Sump diameter (inches) <br />42 <br />42 <br />42 <br />Sump depth (inches) <br />70 <br />72 <br />68 <br />Height from tank top to highest <br />14 <br />15 <br />16 <br />piping penetration (inches) <br />Height from tank top to lowest <br />17 <br />18 <br />17 <br />electrical penetration (inches) <br />Method of sump attachment to tank <br />Tank Collar <br />Tank Collar <br />Tank Collar <br />Condition of sump prior to testing <br />Dry <br />Dry <br />Dry <br />Portion of sump tested <br />Entire <br />Is system programmed for fail-safe operation? <br />Unknown <br />Was fail-safe verified to be operational? <br />No <br />Was sensor removed for testing? <br />Yes <br />Was sensor properly replaced after testing? <br />Yes <br />Depth of water level from tank top (inches) <br />17 <br />Wait time for water level to stabilize (hr:min) <br />0:10 <br />Test start time <br />1:16 PM <br />Initial Probe Reading <br />3.7426 <br />Test end time <br />1:31 PM <br />Final Probe Reading <br />3.7425 <br />Test duration (hr:min) <br />0:15 <br />Change in water level (± 0.0000 inches) <br />-0.0001 <br />Pass/Fail threshold (±0.0020 inches /; Hr.) <br />0.0020 <br />TEST RESULT <br />PASS <br />Comments: <br />© 2004 Walton Engineering, Inc. <br />