Laserfiche WebLink
SWRCB, January 2002 Page of <br />9. FILL RISER CONTAINMENT SUMP TESTING <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />Fill Riser Containment Sumps are Present, but were Not Tested X <br />Test Method Developed By: <br />❑ Sump Manufacturer <br />❑ Other (Spec) <br />❑ Industry Standard ❑ Professional Engineer <br />Test Method Used: <br />❑ Pressure <br />❑ Other (Spec) <br />❑ Vacuum ❑ Hydrostatic <br />Test Equipment Used: <br />Sum Diameter: <br />Fill Sump # <br />Equipment Resolution: <br />MEMEMEMEMEEM <br />Fill Sump # Fill Sump # Fill Sump # <br />Sum Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />water and starting test: <br />Test Start Time: <br />Initial Reading (RI): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF—RI): <br />Pass/Fail Threshold or Criteria: <br />Test Result:. <br />❑ Pass' . ❑ Fail <br />❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail <br />Is there a sensor in the sump? <br />❑ Yes No <br />❑ Yes No ❑ Yes No ❑ Yes ❑ No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />❑ Yes []No NA <br />❑ Yes ❑ No NA ❑ Yes ❑ No NA ❑ Yes ❑ No ❑ NA <br />Was sensor removed for testing? <br />❑ Yes []No NNA0 <br />❑ Yes ❑ No -NA ❑ Yes El No NA 11 Yes L1 No ❑ NA <br />Was sensor properly replaced and <br />verified functional after testin ? <br />❑ Yes ❑ No <br />Yes ❑ No NA ❑ Yes ❑ No NA ❑ Yes ❑ No ❑ NA <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />