COMPLIANCE INFO_2006-2015 - Laserfiche WebLink

Home Browse Search

D. Results of Testing/Servici Software Version Installed: . r Complete the;followng checklist: s ❑ No* Is the audible alarm operational? Is the visual alarm operational? Were all sensors visually inspected, functionally tested, and confirmed operational? Were all sensors installed at lowf st point of secondary containment and positioned so that other equipment will not interfere with their proper operation? Yes ❑ No* ❑ No* ❑ No* Yes Cl Yes ❑ No* _ If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) operational? es ❑ No* ❑ N/A For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate positive shut -down? (Check all that apply) ump/Trench Sensors; E"Yispenser Containment Sensors. Did you confirm positive shut -down due to leaks and sensor failure/disconnection? Rlres; ❑ No. For tank systems that utilize the monitoring system as the primary tank, overfill warning device (i.e. no mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? % Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E, below. Cl Yes ❑ No* /A No El Yes* ElYes* No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that appl}J ❑ Product; ❑ Water. If yes, describe causes. in Section E, below. Was monitoring system set-up reviewed to ensure proper settings? Attach setup reports, if applicable s El No* Yes ❑ No* I Is all monitoring equipment operational per manufacturer's specifications? if * In Section E DOW, E. Comments: