COMPLIANCE INFO_1988-2004 - Laserfiche WebLink

Home Browse Search

0.7 -0 -4 09A ar s MAN Mil CONSUNT FLOW. Provides constant flow for up to 8 nozzles at a predetermined flow rate set at installation. From January 1, 1996, the EPA requires a maximum flow rate per nozzle of 10 GPM. The STP VS2 meets this requirement with a one . time investment. To comply, the maximum flow rate for one nozzle is adjusted to a maximum of 10 GPM. The STP VS2 will provide a constant flow rate for up to 8 nozzles operating simultaneously. - ° INTELLIGENCE: The Variable Frequency Controller has continuous running diagnostics and displays system conditions on the controller. Dry Bunning • vow Incoming Voltage Locked Rotor in Pump • Open Circuit between Controller and Motor Short Circuit between Controller and Motor Thermal Overload in Controller Controller capacitors failing r +.av! �°.vZ 4 :c Power Supply Options: • 60 Hz Applications: Available in 1/3,3/4, 11/2' and 11/2 hp high pressure models in 208-230 volt, single phase, and 200 volt 3 phase. • 50 Hz Applications: Available in 3/4,11/2 and 11/2 hp high pressure models in 220-240 volt, single phase, 380-415 volt 3 phase, and 200 volt 3 phase. 50/60 Hz Applications: 2 hp Variable Speed Option for use with Variable Frequency Controller only. Input 200.250 volt, 50 or 60 Hz, single or 3 phase. Controller provides 3 phase power to 2 hp variable speed pump motor. Pump Motor- Centrifugal otorCentrifugal type, directly interchangeable with most competitive makes. • Maximum liquid viscosity: 70 SSU at 60° F. (15.5°C). • Thermally protected: Automatic thermal overload turns motor off at approximately 2050 F C95* C) and resets on at approx.1150 F (45° C). Liquid Compatibility: • Standard units compatible with fuel mixtm es containing up to 15% ethanol or methanol with gasoline and 20% MTBE, 20% i TBE, or 17% TAXIE with gasoline, and diesel fuels. • Alcohol/Gasoline models (designated with AG in model number) are compatible in fuel mixtures containing any combination of ethanol or methanol and gasoline and 20% M1BE, 20% ETBE, or 17%'TAIM with gasoline, and diesel fuels. Check Valve: • 2 31e (70mm) diameter constructed of aluminum and steel with fluorocarbon seal. (Alodined aluminum for AG models) • Optional Adjustable Check Valve available for electronic line leak detectors that require specific pressure settings. Pressure Belief Valve: • Standard valve is set to relieve static line pressure at 35-50 PSI (2.38 to 3.4 bar), reseals above 20 PSI (L36 bar). Other settings available. Air Eliminator. • Returns air to tank with one way check valve to prevent back flow. Seal Elastomers: • All wetted seals on standard units use Vit0e. • Alcohol/Gasoline (AG) models use Viton GFL70 fluorocarbon seals. Syphon: • Syphon Primer in venturi type, capable of 26° Hg (66cm) vacuum.. • Syphon Check Valve is machined aluminum, field repairable. Variable Frequency Controller Size: • Enclosure size is 51/8° x 10d x 81/4° (130mm x 254mm x 210mm). Approvals and/or Listings: • M, CSA, BASEEFA, TUV, SAA, BHI, DT -1 TRO, THs, KHK, FTZU, others pending. Quality Certification: • FE Petro is an ISO 9001 Certified Manufacturer.