COMPLIANCE INFO_2005-2012 - Laserfiche WebLink

Home Browse Search

zAl Manual - TLS-3XX Series Consoles Leak Test Duration To set the test rate to 0.1 gph (0.381ph), press CHANGE, then press ENTERconium your choice. The system displays the following message: RECMWE TEST RATE: 0.10 GAUHR PRESS <STEP> TO CONTINUE DEC 2 1 2007 Press STEP to continue. ENVIRONMENT HEALTH � r` � ` I„ENT HEALTH PERMIT/SERVICES ' ,ERVICES Leak Test Duration If necessary, press STEP until you see the following message: TEST DURATION: ALL TANK DURATION: 02 To accept the displayed duration, press STEP. To set another test duration, press CHANGE. The maximum duration is 6 hours. We recommend a minimum duration of two hours for 0.2 gph (0.76 1ph) tests and three hours for 0.1 gph (0.38 Iph) tests. Note: If you have Leak Test Early Stop enabled and the console determines that an in -tank leak test has passed after the first two hours of the test, the test is completed, even though you had entered a Leak Test Duration of more than 2 hours. Enter the test duration in hours and press ENTER to confirm your choice: DURATION: XX PRESS <STEP> TO CONTINUE Press STEP to continue. Leak Test Early Stop -_r p--Aalr1) If necessary, press STEP until you see the following message: 4' TST EARLY STOP: ALL TANKS DISABLED Disabled is the default setting. When enabled this feature willpre vent an In -Tank Leak Test from starting under the following conditions: 1. Leak Min Periodic is less than Leak Min Annual. 2. It is less than 8 hours from a delivery. 3. The product temperature is less than 0°F (-17.6°C) or more than +100°F (+37.41C). 4. There is too little fuel in tank. To accept the disabled condition, press STEP. To enable Leak Test Early Stop, press CHANGE and then ENTER and the system displays: TST EARLY STOP: ALL TANKS ENABLED Press STEP to continue. 8-8 I -d 2*,69T9-b602 OUI SJ0'.0eJ4UO3 nI 94T13 e6E:90 LO TZ o9a