Laserfiche WebLink
UST SYSTEM PRINTSET INFORMATION <br />i . Four complete sets of plans (To include specification sheets and/or equipment brochures if not an file). <br />2. Plans drawn to scale in non -erasable print. <br />3. Plot plan to show location and number of tanks. <br />4. Tank cross-sectional diagram included on prints submitted. <br />5. Detail of tank, piping system, excavation and cover. <br />6. Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br />Article 3, Sec. 2631 (r) & 26351 <br />7. Verification of product compatibility with the tank(s), piping, monitoring <br />device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)] <br />8. Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)] <br />9. Tightness Test (NFPA 30) is required on both primary (10) and secondary (20) containment system before covering. <br />[Section 2635 (b) (6) & (7)] <br />10. Double walled tanks using pressure or vacuum testing to monitor the annular space. (Section 2635 (b) (7)] <br />11. NFPA 329 "Precision Test10 required upon completion of installation with tank in operating condition. Test results to <br />be submitted directly to PNS/EHD from the testing company or owner of facility. [Health & Safety Code, Division 20, <br />Chapter 6.7, Section 25291 (g)] <br />ic. tnww wru-waosw. <br />TANK # <br /># <br /># <br /># <br /># <br />CAPACITY (Gallonsj <br />101000 <br />10 000 <br />10 000 <br />10 000 <br />MANUFACTURER <br />erXeS <br />Xerxes <br />Xerxes <br />Xerxes <br />ber- <br />1 er- <br />F ber- <br />F er— <br />COMPOSITION <br />MODEL <br />de <br />PRODUCT 3SOline ) <br />nl <br />e Unl <br />r Un <br />Mid- rad Unl <br />CORROSION PROTECTION <br />A <br />/ A <br />N/A <br />N I A <br />U.L. LISTED <br />ES <br />ES <br />YES <br />YES <br />COMPATIBILITY WITH 100% <br />ES <br />YES <br />YES <br />IYES <br />METHANOL <br />13. TANK(s) TO BE INSTALLED <br />_ A. Steet-clad with fiberglass reinforced plastic. <br />B. Holiday test required immediately before "setting10 tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)] <br />JL C. Fiberglass [Section 2635 (3) and 2631 (p)] <br />(1) Striker plate dimensions materials. <br />® (2) Striker plate under all accessible openings. <br />(3) Installation instructions require an air test and soap bubble test prior to installation. <br />D. Non -clad steel tank [Section 2635 (b)] <br />(1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br />etc.). <br />® (2) Approved by a corrosion engineer or N.A.C.E. technician. <br />® (3) Document stating inspection method and frequency (minimum semi -arcual inspection requirement). <br />12 <br />