Laserfiche WebLink
7j <br />r7� <br />6. Overfill Protection System (spill catchment basin(s) reguired) <br />A. Nonmotor vehicle fuels (See Option 1A) <br />1. Level sensing device and #2 or #3 below <br />2. Audible/visual alarm triggered to liquid level sensor <br />3. Automatic shut-off device <br />B. Motor vehicle fuels only <br />1. Manual monitoring <br />a. Written filling procedure provided <br />b. Procedure addresses all of the following: <br />1) Visual monitoring of fuel level and filling operation <br />2) Available caacity of tank is at 103% or +200 gallons <br />(2635- 9) (AM)(C)) <br />3) Metered input <br />C. Spill catchment basin size <br />1. Minimum 5 gallons <br />Z"c <br />10. Secondary containers (Includes leak interception and detection systems). <br />A. Backfill in secondary container- Article 3, Section 2635) <br />I. See Article 3 Section 2635(c) (1-8). <br />B. Two or more primary containers within secondary container (Demonstrate <br />product compatibilities). <br />C. Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />D. Water tight cover for secondary container excavation (Article 3, Section <br />2635(7)). <br />11. Piping <br />A. Double c ntainment required for: <br />I. Product and vapor recovery lines. <br />2. Vent line (excluded only if ball float valve is installed). <br />