Laserfiche WebLink
Dec 13 OZ 01s35p 5592770106 p.4 <br />0 0 <br />OPW 61SO OVERFILL PREVENTION VALVES <br />61SO Two -Point <br />The OPW 61 SO Two -Point is used for two-point fill applications, <br />tanks equipped with separate product and vapor return <br />connections. The OPW 61SO replaces the standard fill drop <br />tube in 3" or 4" fill riser pipes. The 61SOM" models are specially <br />designed for compatibility with M-85 and M-100 methanol fuels. <br />Both the OPW 61 SO and 61SOM are available with sealed vapor <br />paths for use in areas where GARB requirements have been <br />adopted. The OPW 61SO.1000 and 61SO-100C (CARB) feature <br />a groove that runs the full length of the tube to allow a gauging <br />system to share the fill riser with the overfill prevention valve. The <br />OPW 61 SO -4901 features low flow shut-off (10 gpm) for use in <br />areas requiring KIWA approved overfill prevention valve. The <br />OPW 61 SO -490C is a vapor -tight KIWA approved valve. <br />Integral Channel for <br />Gauging System <br />Apparatus <br />OPW 1-2100 Series <br />Spill Container <br />OPW 61SO <br />Integral Flow <br />Deflector <br />> <br />Actuating Float <br />OPW 634TT Cap <br />OPW 61 SO — <br />— <br />IPW 633T <br />Adaptor <br />OPW 61SO-100C _U <br />Grooved Tube <br />Design for Two -Paint Leave 6" from tube <br />Applications with Tank bottom to tank <br />Gauging Probes. - j-'- <br />6" <br />61SOC coaxial <br />The OPW 61 SOC is used for coaxial rill applications, tanks <br />equipped with a single product/vapor return connection. The 61SOC <br />replaces the standard coaxial till drop tube in a 4" riser fill pipe. <br />61SOP PODDeted Coaxial <br />The OPW 61SOP is used in poppeted coaxial fill applications in <br />areas where GARB requirements have been adopted. (CARS <br />Executive order G-70-52AN). A special poppeted adaptor fitting <br />allows the vapor return path to open only when a fill elbow is <br />connected, thus preventing fugitive emissions. <br />OPW 12100 Series <br />Spill Container <br />Vapor Return <br />Path — <br />OPW 61SOC <br />or 61 SOP <br />DPW 634TT Cap <br />OPW 633TC or <br />633TCP Adaptor <br />Leave 6" from tube <br />bottom to tank <br />