Laserfiche WebLink
Nov 30 10 05:25p Reliable Petrol A -845-8953 p.8 <br /> Installation of the LD-2000 &LD-2200 <br /> Leak Detectors <br /> Paae 2 <br /> 6. Apply pipe sealant to the threads of the 90 degree compression fitting and install into <br /> the top of the leak detector. Tighten firmly,but do not over-tighten. <br /> 7. Remove the 11411 pipe plug from the tank test port on the submersible pump. Install <br /> the straight compression fitting into this port. <br /> 8. Install the copper tube into the compression fittings. Tighten firmly, but do not over- <br /> tighten. <br /> 9. Turn o 1 submersible pump power. <br /> 10. Turn p imp on at dispenser. Check tightness of leak detector to assure there are no <br /> leaks. <br /> 11. Slowly pen ball valve at discharge of turbine. <br /> 12. Test le'ik detector in the system as per the LDT-890 Installation & eration Protocol. <br /> If a VVII.leak detector fails to detect a leak in the line system, please follow the <br /> instruction on A . stinent of VMI Leak Detector dated March 28th, 2005. This is <br /> included With your leak detector or can be located on our website at <br /> www.va or ess.com under Technical Bulletins: Technical Bulletin 032805 <br /> Adjustment OL VMI Leak Detector. <br /> Vaporless Manufacturing,Inc. <br /> 8700 East Long Mesa Drive,Prescott valley,Arizona 86314 <br /> 800-367-0185 928-775-5191 Fax: 928-775-5309 <br /> Email: vmi@vaporless.com Website: www.vapDricss.com <br />