Laserfiche WebLink
SAMPLING PROTOCOL FOR ROUTINE PIPING/DISPENSER REMOVAL/RE W CM NT <br />The following represents minimum sampling criterion required for closure compliance. Soil sampled iI LTH <br />representative of native soils beneath the tank's invert (tank's bottom) at a collection depth not to ex 1 E8 <br />contamination is documented during closure, an Unauthorized Release Notification must be completed and submitted within <br />five (5) working days pursuant to California Health & Safety Code, Section 25295. <br />TABLE #2 RECOMMENDED MINIMUM VERIFICATION ANALYSES <br />FOR <br />DISPENSER SAMPLES <br />1 Sample beneath each dispenser <br />STORAGE TANK INVESTIGATIONS <br />PIPING SOIL SAMPLES <br />1 Sample every 20 lineal feet <br />TPH-D <br />DISPENSER & PIPING STOCKPILE SAMPLES <br />2 Samples every 50 cubic yards <br />TABLE #2 RECOMMENDED MINIMUM VERIFICATION ANALYSES <br />FOR <br />UNDERGROUND <br />STORAGE TANK INVESTIGATIONS <br />TANK TANK <br />TPH-G <br />TPH-D <br />BTX & E CL HC TOTAL MTBE OXYGENATES METALS PCB <br /># CONTENTS <br />LEAD (MTBE, TBA, DIPE, ICAP/AES 8270 <br />8015 <br />8015 <br />8020 8010 8020 ETBE,TAME) or 8080 <br />8260 <br />8260 <br />8260 8240 7420 8260 1,2 DCA & EDB <br />8260 7421 AA <br />8260 <br />LEADED GAS <br />X <br />X <br />X <br />X <br />UNL GAS <br />X <br />X <br />X <br />DIESEL <br />X <br />X <br />KEROSENE <br />X <br />X <br />X <br />UNK FUEL <br />X <br />X <br />X <br />X <br />X <br />PROD. OIL <br />X <br />X <br />X <br />CHLOR. <br />SOLVENTS <br />X <br />X <br />X <br />NONCHLOR <br />SOLVENTS <br />X <br />X <br />X <br />WASTE\USED OIL <br />OR <br />UNKNOWN <br />X <br />X <br />X <br />X <br />X <br />X <br />X <br />CONTENTS <br />Notes: <br />1. EPA Method 82608 analyses must include all analytes listed in the method plus fuel oxygenates <br />methyl -tertiary -butyl ether (MTBE), diisopropyl ether (DIPE), ethyl -tertiary -butyl ether (EtBE), tertiary - <br />amyl -methyl ether (TAME), tertiary -butanol (TBA), methanol and ethanol and fuel additives 1,2- <br />dichloroethane (1,2 -DCA) and ethylene dibromide (EDB or 1,2-dibromoethane). <br />2. If pentachlorophenol (PCP) is identified, analyze the soil and/or water sample for dioxins and furans by <br />EPA Method 8290 and pesticides by EPA Method 8081A. <br />3. METALS ICRP or AA Inductively Coupled Plasma Atomic Emission Spectrometry 6010 or Atomic <br />Absorption Spectrometry 7000. Metals: Cadmium, Chromium III and VI, Lead, Zinc and Nickel. <br />4. Non-proprietary, performance based analytical methods may be used with approval of Regional Board <br />staff. <br />Revised 02/20/09 <br />P <br />