COMPLIANCE INFO_2002-2010 - Laserfiche WebLink

Home Browse Search

r • SWRCB,January 2002 Page of 7. UNDER-DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: ❑UDC Manufacturer ❑Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic ❑Other(Spec) Test Equipment Used:TS STS Equipment Resolution:0.0001" UDC#1-2 UDC#3-4 UDC# UDC# UDC Manufacturer: BRAVO BRAVO UDC Material: STEEL STEEL UDC Depth: 10 10 Height from UDC Bottom to Top 0 0 of Highest Piping Penetration: Height from UDC Bottom to 0 0 Lowest Electrical Penetration: Condition of UDC prior to GOOD GOOD testing: Portion of UDC Tested Does turbine shut down when UDC sensor detects liquid(both ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Is system programmed for fail- ❑Yes ❑No ❑NA ❑Yes :]No DNA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA safe shutdown?" Was fail-safe verified to be ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA operational?* Wait time between applying pressure/vacuum/water and starting test Test Start Time: 1005 1057 Initial Reading(Rj): 2.8885 0.1225 Test End Time: 1020 1112 Final Reading(RF): 2.8882 0.1219 Test Duration: 15 MIN 15 MIN Change in Reading(RF-RI): 0.0003 0.0006 Pass/Fail Threshold or Criteria: 0.002 0.002 Test Result: ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail D Pass ❑Fail Was sensor removed for testing? ❑Yes ❑No ❑NA ❑Yes D No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? ❑Yes 11No ❑NA 11Yes ❑No ElNA ❑Yes []No ❑NA ❑Yes ❑No ❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) he entire depth of the UDC is not tested specify how much was tested. If the answer to anof the questions indicated with an If t p p fy _y asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)