Laserfiche WebLink
INVENTORY MEASUREMENT METHOD: X ELECTRONIC <br />INVENTORY EQUIPMENT: Veeder-Root TLS -350 MAG 1 Probe Series 847390 <br />The Chevron Operator at the facility will complete daily product inventory reconciliation. <br />1) Approved meters for tank inputs and withdrawals in accordance with CCR Title 4, Chapter 9, <br />Subchapter 1 Tolerance and Specifications for Commercial weighing and measuring devices. <br />2) Inventory reconciliation "exceeding a variation of 1.0 percent of the monthly metered sales <br />plus 130 gallons must be investigated in accordance with this section." <br />3) The inventory will be reconciled monthly by the Operator, and: <br />Should inventory reconciliation indicate a loss greater than specified, the investigative steps <br />outlined in California Code of Regulations, Title 23 Waters, Subchapter 16 Underground Tank <br />Regulations, Article 4, Section 2646(k), will be implemented. <br />4► Annually the Operator will submit the attached inventory certification form to the local agency. <br />TEST FREQUENCY <br />All secondary containment systems (i.e. tank annular spaces, secondary piping, piping sumps, <br />dispenser containment, etc.) installed after January 1, 2001 shall be tested upon installation, six (6) <br />months after installation, and every 36 months thereafter per Title 23 CCR §2637(x). <br />TEST METHODS AND PROCEDURES <br />All secondary containment testing shall be performed by either a tank tester licensed by the State of <br />California; or any person possessing a current Class A, C-10, C-34, C-36, or C-61 (1340) License <br />issued by the Contractors State License Board (CSLB) per Title 23 CCR §2537(a)(3). <br />All testing shall be performed every 3 years in accordance with the secondary containment system <br />manufacturer's guidelines or standards. If there are no manufacturer's guidelines or standards, <br />testing shall be performed using an applicable method specified in an industry code or engineering <br />standard. If there are no engineering standards, a test method approved by a state -registered <br />professional engineer shall be used per Title 23 CCR §2537(a)(2). <br />