COMPLIANCE INFO_2006-2009 - Laserfiche WebLink

Home Browse Search

� 0 0 UNDERGROUND STORAGE TANK MONITORING PLAN-PAGE 1 I YPE OF ACTION ❑ L NEW PLAN ® 2.CHANGE OF INFORMATION Mot. PLAN TYPE ® MONITORING IS IDENTICAL FOR ALL.USTs AT THIS FACILITY. M02. (Check one item only) ❑ THIS PLAN COVERS ONLY THE FOLLOWING UST SYSTEM(S): I. FACILITY INFORMATION FACILITY ID#(Agency Use Only) BUSINESS NAME(Same as FACILITY NAME) Pacific Bell Telephone Company dba AT&T California UE020/LODICA01 M63. BUSINESS SITE ADDRESS 124 W.ELM STREET " CITY LODI Mos' II. EQUIPMENT TESTING AND PREVENTIVE MAINTENANCE State law requires that testing,preventive maintenance and calibration of monitoring equipment(e.g.,sensors,probes,line leak detectors,etc.)be performed at the frequency specified by the equipment manufacturers'instructions,or annually,whichever is more frequent,and that such work must be performed by qualified personnel. MONITORING EQUIPMENT IS SERVICED ® L ANNUALLY MU6. ❑ 99.OTHER(Specify): M07 III. MONITORING LOCATIONS This monitoring plan must include a Site Plan showing the general tank and piping layouts and the locations where monitoring is performed(i.e.,location of each sensor,line leak detector,monitoring system control panel,etc.). If you already have a diagram(e.g.,current UST Monitoring Site Plan from a Monitoring System Certification form,Hazardous Materials Business Plan map,etc.)which shows all required information,include it with this plan. IV. TANK MONITORING MONITORING IS PERFORMED USING THE FOLLOWING METHODS):(Check all that apply) Mw. ® 1.CONTINUOUS ELECTRONIC MONITORING OF TANK ANNULAR(INTERSTITIAL)SPACE(S)OR SECONDARY CONTAINMENT VAULT(S) SECONDARY CONTAINMENT IS: ® a.DRY ❑ b.LIQUID FILLED ❑ c.PRESSURIZED ❑ d.VACUUM Mu. PANEL MANUFACTURER: Veeder Root M12. MODEL#: TLS-350 M13. LEAK SENSOR MANUFACTURER: Veeder Root M14. MODEL#(s):794390420 MI5. ❑ 2.AUTOMATIC TANK GAUGING(ATG)SYSTEM USED TO MONITOR SINGLE WALL TANK(S) PANEL MANUFACTURER: MIa. MODEL#: M17. IN-TANK PROBE MANUFACTURER: MIN' MODEL#(S): M19. LEAK TEST FREQUENCY: ❑ a.CONTINUOUS ❑ b.DAILY/NIGHTLY ❑ c.WEEKLY M20. ❑ d.MONTHLY ❑ e.OTHER(Specify): M21. PROGRAMMED TESTS: ❑ a.0.1 h. b.0.2 h. ❑ c.OTHER(Specify): M22.M23 g•P• ❑ g•P• ❑ 3.INVENTORY RECONCILIATION ❑ a.MANUAL PER 23 CCR§2646 ❑ b.STATISTICAL PER 23 CCR§2646.1 M24. ❑ 4.WEEKLY MANUAL"TANK GAUGING(MTG)PER 23 CCR§2645 TESTING PERIOD: ❑ a.36 HOURS ❑ b.60 HOURS M25. ❑ 5.INTEGRITY TESTING PER 23 CCR§2643.1 TEST FREQUENCY: ❑ a.ANNUALLY ❑ b.BIENNIALLY ❑ c.OTHER(Specify): Mea.M27 ❑ 6.VISUAL MONITORING DONE: ❑ a.DAILY ❑ b.WEEKLY(Requires agency awrwal) ❑ 99.OTHER(Specify): M28' V. PIPE MONITORING MONITORING IS PERFORMED USING THE FOLLOWING METHOD(S)(Check all that apply) Mao. ® 1.CONTINUOUS ELECTRONIC MONITORING OF PIPING SUMP(SyTRENCH(ES)AND OTHER SECONDARY CONTAINMENT SECONDARY CONTAINMENT IS: ® a.DRY ❑ b.LIQUID FILLED ❑ c.PRESSURIZED ❑ d.VACUUM M31. PANEL MANUFACTURER: Veeder Root M32. MODEL#: TLS-350 M31. LEAK SENSOR MANUFACTURER: Veeder Root M34. MODEL#(S): 794380-208 Mss. WILL A PIPING LEAK ALARM TRIGGER AUTOMATIC PUMP(i.e.,TURBINE)SHUTDOWN? ❑ a.YES ® b.NO M36. WILL FAILURE/DISCONNECTION OF THE MONITORING SYSTEM TRIGGER AUTOMATIC PUMP SHUTDOWN? ❑ a.YES ® b.NO M37. ❑ 2. MECHANICAL LINE LEAK DETECTOR(MLLD)THAT ROUTINELY PERFORMS 3.0 g.p.h.LEAK TESTS AND RESTRICTS OR SHUTS OFF PRODUCT FLOW WHEN A LEAK IS DETECTED MLLD MANUFACTURER(s): M38. MODEL#(S): M39. ❑ 3. ELECTRONIC LINE LEAK DETECTOR(ELLD)THAT ROUTINELY PERFORMS 3.0 g.p.h.LEAK TESTS ELLD MANUFACTURER: Ma). MODEL#: M41. PROGRAMMED IN LINE TESTING: ❑ a.MINIMUM MONTHLY 0.2 g.p.h. ❑ b.MINIMUM ANNUAL 0.1g•P•h. M42. WILL ELLD DETECTION OF A PIPING LEAK TRIGGER AUTOMATIC PUMP SHUTDOWN? ❑ a.YES ❑ b.NO M43. WILL ELLD FAILURE/DISCONNECTION TRIGGER AUTOMATIC PUMP SHUTDOWN? ❑ a.YES ❑ b.NO M44. ❑ 4.INTEGRITY TESTING TEST FREQUENCY: ❑ a.ANNUALLY ❑ b.EVERY 3 YEARS ❑ c.OTHER(Specify) M45.M46. ❑ 5.VISUAL MONITORING DONE: ❑ a.DAILY ❑ b.WEEKLY* ❑ c.MIN.MONTHLY&EACH TIME.SYSTEM OPERATED-* M47. •Requires agency approval ••Allowed for monitoring of unburied emergency generator fuel piping only per HSC§25281.50113) ❑ 6.SUCTION PIPING MEETS EXEMPTION CRITERIA PER 23 CCR§2636(a)(3) ❑ 7.NO PRODUCT OR REMOTE FILL PIPING IS CONNECTED TO THE UST(s) ❑ 99,OTHER(Specify) M49, hwfwm-d(9/24/04)-2/4