Laserfiche WebLink
D. Results of Testing/Servicing 4RECEIVED <br /> Software Version Installed: 122.00 MAR 3 2017 <br /> Complete the following checklist: <br /> pi <br /> nMYe ❑No* Is the audible alarm operational? <br /> ❑No* Is the visual alarm operational? <br /> ❑No* Were all sensors visually inspected, functionally tested,and confirmed operational? <br /> ❑No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment <br /> will not interfere with their <br /> ro r o ration? <br /> ❑X Yes ❑No* If alarms are relayed to a remote monitoring station, is all communications equipment(e.g.modem) <br /> ❑N/A operational? <br /> ❑ Yes ❑No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary <br /> QN/A containment monitoring system detects a leak, fails to operate,or is electrically disconnected?If yes:which <br /> sensors initiate positive shut-down? (Check all that apply) <br /> ❑ Sump/Trench Sensors; ❑Dispenser Containment Sensors. Did you confirm positive shut-down <br /> due to leaks and sensor failure/disconnection? <br /> ❑Yes; ❑No. <br /> ❑ Yes ❑No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e. no <br /> mechanical overfill prevention valve is installed),is the overfill warning alarm visible and audible at the <br /> FXIN/A tank fill point(s)and operating properly?If so, at what percent of tank capacity does the alarm trigger? <br /> ❑Yes* ❑X No Was any monitoring equipment replaced?If yes,identify specific sensors,probes, or other equipment <br /> replaced and list the manufacturer name and model for all replacement parts in Section E,below. <br /> ❑Yes* No Was liquid found inside any secondary containment systems designed as dry systems. (Check all that <br /> apply) ❑Product; ❑Water.If yes,describe causes in Section E, below. <br /> Q Yes ❑No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> ® Yes [:],,,No* Is all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were orwill be corrected. <br /> E. Comments: <br /> Other sensors from one: <br /> L4 gen floor 794380-208/N/A-Certified. <br /> L5 Fire box 794380-208/730237-Certified. <br /> There is an overfill valve installed in drop tube. <br />