Laserfiche WebLink
D. Results of Testing/Servic' <br /> Software Version Installed: 1 L - � <br /> Com ete the folioowIn checklist: <br /> Yes ❑ No* Is the audible alarm operational? <br /> Yes ❑ No* Is the visual alarm o erational? <br /> Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ❑ Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br /> --0N/-A operational? _ <br /> Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ N/A monitoring system detects a leak, fails to operate or is electrically disconnected? If yes: which sensors initiate <br /> positive shut down? (Check all that apply) Sump!':e. -ch Sensors; ❑Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failureldisconnection? ( ; ❑No. <br /> ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br /> 2 ZA mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fillpoint(s)and operating ro rl ? If so,at what percent of tank capacity does the alarm trigger? % <br /> ❑ Yes* No Was any monitoring equipment replaced? If yes,identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all re lacement 2arts in Section E,below. <br /> ❑ Yes* No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)C❑ <br /> Product; U.Water. If yes,describe causes in Section E,below. <br /> O'Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if ap2licable <br /> Yes 1 ❑ No* Is all monitoring equipment o erational per manufacturer's s ifications? --d <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Continents <br /> Page 2 of 3 03101 <br />