COMPLIANCE INFO_1998-2003 - Laserfiche WebLink

Home Browse Search

11. A mechanical line leak detector ( ) was ( ) was not present in the majority of the pipeline systems used in the evaluation. 12. Please specify how much time elapsed between the delivery of product and the start of the data collection: (X) 0 to 6 h (time after completion of circulation and start of test) () 6to 12h () 12 to24h ()24hormore Temperature Conditions This system was evaluated under the range of temperature conditions specified in Table 1. The difference between the temperature of the product circulated through the pipeline for 1 h or more and the average temperature of the backfill and soil between 2 and 12 in. from the pipeline is summarized in Table 1. If Option 1, 2 or 5 was used, a more detailed summary of the product temperature conditions generated for the evaluation is presented in Attachment 4. If Option 3 or 4 was used, no artificial temperature conditions were generated. Table 1. Summary of Tem erature Conditions Used in the Evaluation Does not include trapped va or or flexline tests Minimum Number of Range of Temperature Conditions Required Number of Conditions Used* Differences,T de F)** 1 2 T<-25 4 8 -25 <T<-15 5 10 -15 <T<-5 5 13 -5 <T<+5 5 13 +5 <T<+15 4 8 +15 <T<+25 1 2 T>25 *This column should be filled out only if Option 1,2,or 5 was used. **T is the difference between the temperature of the product dispensed through the pipeline for over an hour prior to the conduct of a test and the average temperature of the backfill and soil surrounding the pipe. Data Used to Make Performance Estimates 13. The induced leak rate and the test results used to estimate the performance of this system are summarized in Attachment 5. Were any test runs removed from the data set? (X)no ( )yes If yes,please specify the reason and include with Attachment 5. (If more than one test was removed, specify each reason separately.) Pipeline Leak Detection System-Results Form Page 3 of 5