Laserfiche WebLink
PolyThem SUMPS <br />Environ introduces a complete line of tank access sumps <br />which are designed to provide maximum environmental <br />protection and sized to accommodate most tank and <br />plumbing installation requirements. PolyTite Sumps are <br />made of a thick polyethylene material which is chemically <br />compatible with petroleum products and inert to <br />underground corrosive agents. <br />All sumps have risers with integral structural ribs to prevent <br />collapse from underground burial loads. They are equipped <br />with liquid tight access covers as well as observation lids. <br />All pipe and conduit entries are sealed with Flexible Entry <br />Boots which allow for angled entries up to 30 degrees. <br />There are a variety of accessories available, such as, tank <br />attachment devices, support brackets and installer tools. <br />• . • 0 <br />• Liquid Tight Sump <br />Provides for Angled Pipe & Conduit Entries <br />6 Riser Extensions are Mechanically Sealed <br />® Models Available for Deep & Shallow Burials <br />Risers Have Integral Structural Ribs <br />• Base Fabrication Guidelines <br />6 Height Adjustable Riser <br />Made of Product Compatible Polyethylene <br />PTS -4248 <br />Installed under a 42" street <br />manhole, this sump provides <br />maximum working access <br />for congested plumbing <br />configurations. Its tank <br />burial depth range is 34 to <br />64 inches deep. <br />PTS -3648 <br />Installed under a 36" street <br />manhole, this sump provides <br />sufficient working access for <br />standard plumbing and pump <br />configurations. Its tank <br />burial depth range is 36 to 64 <br />inches deep. <br />PTS -4230 <br />Installed under a 42" street <br />manhole, this sump provides <br />maximum working access <br />for congested plumbing <br />configurations. Its tank <br />burial depth range is 20 to <br />36 inches deep. <br />PTS -3630 <br />Installed under a 36" street <br />manhole, this sump provides <br />sufficient working access for <br />standard plumbing and pump <br />configurations. Its tank <br />burial depth range is 22 to 36 <br />inches deep. <br />Flexible Entry Boots <br />All pipe and conduit sump <br />entries are made using a <br />liquid tight flexible boot. The <br />boot is of such a design that <br />it permits angled pipe and <br />conduit entries up to 30% <br />Entry Boots are available in <br />a variety of standard sizes. <br />IN <br />I e nv i ro t n <br />P R O ® Y C T i B N C <br />Risers <br />The PTS -4248 & PTS -3648 <br />models have detachable <br />risers that mechanically seal <br />to the sump base. All risers <br />have integral structural ribs <br />to prevent collapse and are <br />height adjustable for varied <br />tank burial depths. <br />Distributed by: <br />Sump Covers & Lids <br />All sump models include <br />access covers with O-ring <br />seals for liquid tightness. <br />Standard covers have a <br />liquid tight 11" diameter <br />observation lid in the center <br />of the cover. Dual access <br />lids are available. <br />Tank Adapters <br />There are a variety of tank <br />attachment devises for <br />mounting the sump. Fitting <br />Adapters permit the sump to <br />be attached to a 4" NPT tank <br />fitting and there are adapter <br />kits for attachment to tank <br />manways and collars. <br />327 Gonion Drive <br />Lionville, PA 19341 <br />TEL: 215-594-0297 <br />FAX: 215-594-9042 <br />ALL PATENTS PENDING <br />0 1990 ENVIRON PRODUCTS INC <br />