Laserfiche WebLink
Mechanical Line Leak Detector- Franklin Fueling Systems Page 2 of 2 <br /> urged from piping between the discharge of the MLD and the dispenser solen <br /> • All models will indicate detection of leaks equivalent to 3 gph at 10 psi or les! <br /> longer than 2 to 3 seconds to open. <br /> • All Models will remain in the "open" position during (pump on) product delive <br /> manifold discharge pressures as low as 1 psi <br /> s All models will detect leaks up to approximately 10 feet above the point that <br /> installed. <br /> • All models will reset to the "tripped"position when (pump off) line pressure c <br /> below about 3 psi <br /> Approvals <br /> • Third Party certified to comply with US EPA requirements 280.41 (B) and 28( <br /> for continuous monitoring of pressurized piping. <br /> • All MLD models are UL and cUL listed for installation into all 4" FE Petro Subn <br /> as well as most competitive models. <br /> • Consult factory for other applicable approvals. <br /> Quality Certification <br /> • Franklin Fueling Systems is an ISO 9001 Certified Manufacturer. <br /> TERML OF USE COPYRIGHT 199.3-ZOO7 <br /> http://www.franklinfueling.com/products/sps/MLD.asp 7/9/2008 <br />