COMPLIANCE INFO_2006-2008 - Laserfiche WebLink

Home Browse Search

ONIT NG SYSTEM CETIFI TION se By All Jurisdictions Within the State of Californi Authority Cited: Chapter 6.7, Health and Safety Code; Chapter 16, Division 3 Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: CONOCO PHILLIPS #2705446 Site Address: 1403 COUNTRY CLUB BLVD Facility Contact Person: MANAGER Make/Model of Monitoring System:TLS-350 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced City: STOCKTON Contact Phone No: 943-2082 Date of Testing/Service: 04/23/2008 Work Order Number: 2256296 CA Zip: 95204 Tank ID: 87 Tank ID: 91 X In -Tank Gauging Probe. Model: MAG X In -Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 303 X1 Annular Space or Vault Sensor. Model: 303 X Piping Sump/Trench Sensor(s). Model: 208 EPiping Sump/Trench Sensor(s). Model: 208 Fill Sump Sensor(s). Model: ElFill Sump Sensor(s). Model: X Mechanical Line Leak Detector. Model: FE PETRO X Mechanical Line Leak Detector. Model: FE PETRO Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: X Tank Overfill/High-Level Sensor. Model: MAG Tank Overfill/High-Level Sensor. Model: MAG Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Tank ID: DSL Tank ID: -71 In -Tank Gauging Probe. Model: MAG In -Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: 303 Annular Space or Vault Sensor. Model: X Piping Sump/Trench Sensor(s). Model: 208 Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: X Mechanical Line Leak Detector. Model: FE PETRO Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: _ Tank Overfill/High-Level Sensor. Model: MAC, Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Dispenser : 1/2 Dispenser ID: 3/4 7 Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s) Model: X❑ Shear Valve(s). x_ Shear Valve(s) ❑ Dispenser Containment Float(s) and Chain(s). 71 Dispenser Containment Float(s) and Chain(s). Dispenser ID: 5/6 Dispenser ID: 7/8 FIDispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: ®Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). 71 Dispenser Containment Float(s) and Chain(s). Dispenser ID: Dispenser lD: F1Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). * If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): MX System set-up X❑ Alarm history report Technician Name (print): DANIEL ORTIZ Certification No.: Signature: _ License. No.: Testing Company Name:Tanknology Phone No.: (800) 800-4633 Site Address: 8501 N. MoPac Expressway, suite 400, Austin, TX 78759 Date of Testing/Servicing: 04/23/2008 Monitoring System Certification Page 1 of 3 Based on CA form dated 03/01