COMPLIANCE INFO_2011-2018 - Laserfiche WebLink

Home Browse Search

• UNDER -DISPENSER CONTAINMENT (UDC) TESTING Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard ❑ Professional Engineer ® Other (Specify) Caldwell Sump Tester Test Method Used: ❑ Pressure ❑ vacuum ® Hydrostatic ❑ Other (Specify) Test Equipment Used: Caldwell Sump Tester Equipment Resolution: 0.005 inches in UDC#1 UDC #2 UDC #3 UDC# UDC Manufacturer: Bravo Bravo Bravo Bravo UDC Material: Plastic Plastic Plastic Plastic UDC Depth: 8 inches 8 inches 8 inches 8 inches Height from UDC Bottom to 0 inches 0 inches 0 inches 0 inches Top of Highest Piping Penetration: Height from UDC Bottom to N/A N/A N/A N/A Lowest Electrical Penetration: Condition of UDC prior to Dry Dry Dry Dry testing: Portion of UDC Tested 6 inches 6 inches 6 inches 6 inches Does turbine shut down when ®Yes ❑No ❑N/A ®Yes ❑No [—]N/A ®Yes ❑No ❑N/A ®Yes ❑No ❑N/A UDC sensor detects liquid Turbine shutdown response 3 sec 3 sec 3 sec 3 sec time Is system programmed for ®Yes ❑No ❑N/A ®Yes ]No ❑N/A ®Yes ❑No ❑N/A ®Yes ❑No ❑N/A fail-safe shutdown Was fail-safe verified to be ®Yes ❑No ❑N/A ®Yes [:]No[—]N/A ®Yes ❑No [:]N/A ®Yes ❑No ❑N/A operational Wait time between applying pressure/vacuum/water and 5 minutes 5 minutes 5 minutes 5 minutes starting test Test Start Time: 10:30 11:15 12:00 12:45 Initial Reading (R,): 2"d Rin 2"d Ring 2nd Ring 2nd ring Test End Time: 11:-00 11:45 12:30 13:15 Final Reading (RF): 2nd Ring 2nd Ring 2nd Ring 2nd ring Test Duration: 30 minutes 30 minutes 30 minutes 30 minutes Change in Reading (RF -R,): 0 Change 0 Change 0 Change 0 Change Pass/Fail Threshold or Criteria: 0.005 inches in 1/2 0.005 inches in 0.005 inches in 1/2 0.005 inches in 1/2 hour 1/2 hour hour hour Test Result: ® Pass , ❑ Fail ®; Pass El ® Pass ❑ Fail ® Pass ❑ Fail Fail Was sensor removed for ®Yes ❑No ❑N/A ®Yes ❑No ❑N/A ®Yes ❑No ❑N/A ®Yes ❑No ❑N/A testing? Was sensor properly replaced and verified functional after ®Yes ❑No ❑N/A ®Yes [—]No ❑N/A ®Yes [:]No [—]N/A ®Yes ❑No ❑N/A testing? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)